lkml.org 
[lkml]   [2018]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 04/18] MIPS: dts: Add initial support for Intel MIPS SoCs
From
Date


On 8/4/2018 7:11 PM, Hauke Mehrtens wrote:
> On 08/03/2018 05:02 AM, Songjun Wu wrote:
>> From: Hua Ma <hua.ma@linux.intel.com>
>>
>> Add dts files to support Intel MIPS SoCs:
>> - xrx500.dtsi is the chip dts
>> - easy350_anywan.dts is the board dts
>>
>> Signed-off-by: Hua Ma <hua.ma@linux.intel.com>
>> Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
>> ---
>>
>> Changes in v2:
>> - New patch split from previous patch
>> - The memory address is changed to @20000000
>> - Update to obj-$(CONFIG_BUILTIN_DTB) as per commit fca3aa166422
>>
>> arch/mips/boot/dts/Makefile | 1 +
>> arch/mips/boot/dts/intel-mips/Makefile | 4 ++
>> arch/mips/boot/dts/intel-mips/easy350_anywan.dts | 26 ++++++++++
>> arch/mips/boot/dts/intel-mips/xrx500.dtsi | 66 ++++++++++++++++++++++++
>> 4 files changed, 97 insertions(+)
>> create mode 100644 arch/mips/boot/dts/intel-mips/Makefile
>> create mode 100644 arch/mips/boot/dts/intel-mips/easy350_anywan.dts
>> create mode 100644 arch/mips/boot/dts/intel-mips/xrx500.dtsi
>>
>> diff --git a/arch/mips/boot/dts/intel-mips/easy350_anywan.dts b/arch/mips/boot/dts/intel-mips/easy350_anywan.dts
>> new file mode 100644
>> index 000000000000..e5e95f90c5e7
>> --- /dev/null
>> +++ b/arch/mips/boot/dts/intel-mips/easy350_anywan.dts
>> @@ -0,0 +1,26 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/interrupt-controller/mips-gic.h>
>> +#include <dt-bindings/clock/intel,grx500-clk.h>
>> +
>> +#include "xrx500.dtsi"
>> +
>> +/ {
>> + model = "EASY350 ANYWAN (GRX350) Main model";
> Main model can be removed, it does not identify the board.
Thanks, will remove.

>> + compatible = "intel,easy350-anywan";
> I think this should be
> compatible = "intel,easy350-anywan", "intel,xrx500";
>
> Are there different revisions of the EASY350 Anywan board or only of the
> EASY550 board?There are at least some differences in the power supply on
> the EASY550 V1 and EASY550 V2 board. I would suggest to be here very
> specific to make it easier when adding more boards.
OK, thanks.

>> +
>> + aliases {
>> + serial0 = &asc0;
>> + };
>> +
>> + chosen {
>> + bootargs = "earlycon=lantiq,0x16600000 clk_ignore_unused";
> What happens when you remove clk_ignore_unused?
> If it crashes we should probably define some of the clock to be always
> active.
OK, will check and improve if possible.

\
 
 \ /
  Last update: 2018-08-06 11:21    [W:0.124 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site