lkml.org 
[lkml]   [2018]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] drm: rcar-du: Update Gen3 output limitations
Date
The R-Car Gen3 DU utilises the VSP1 hardware for memory access. The
limits on the RPF and WPF in this pipeline are 8190x8190.

Update the supported maximum sizes accordingly.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
---
drivers/gpu/drm/rcar-du/rcar_du_kms.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index ed7fa3204892..7c7aff8cdf77 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -512,12 +512,22 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)

dev->mode_config.min_width = 0;
dev->mode_config.min_height = 0;
- dev->mode_config.max_width = 4095;
- dev->mode_config.max_height = 2047;
dev->mode_config.normalize_zpos = true;
dev->mode_config.funcs = &rcar_du_mode_config_funcs;
dev->mode_config.helper_private = &rcar_du_mode_config_helper;

+ if (rcdu->info->gen < 3) {
+ dev->mode_config.max_width = 4095;
+ dev->mode_config.max_height = 2047;
+ } else {
+ /*
+ * The Gen3 DU uses the VSP1 for memory access, and is limited
+ * to frame sizes of 8190x8190.
+ */
+ dev->mode_config.max_width = 8190;
+ dev->mode_config.max_height = 8190;
+ }
+
rcdu->num_crtcs = hweight8(rcdu->info->channels_mask);

ret = rcar_du_properties_init(rcdu);
--
2.17.1
\
 
 \ /
  Last update: 2018-08-31 20:14    [W:0.076 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site