Messages in this thread | | | Date | Fri, 31 Aug 2018 13:40:48 +0300 | From | Andi Shyti <> | Subject | Re: [PATCH v3] dt-bindings: arm: Explicitly mark Samsung Exynos SoC as unstable |
| |
Hi Krzysztof,
On Thu, Aug 30, 2018 at 08:02:05PM +0200, Krzysztof Kozlowski wrote: > Samsung Exynos SoCs and boards related bindings evolved since the initial > introduction, but initially the bindings were minimal and a bit incomplete > (they never described all the hardware modules available in the SoCs). > Since then some significant (not fully compatible) changes have been > already committed a few times (like gpio replaced by pinctrl, display ddc, > mfc reserved memory, some core clocks added to various hardware modules, > added more required nodes). > > On the other side there are no boards which have device tree embedded in > the bootloader. Device tree blob is always compiled from the kernel tree > and updated together with the kernel image. > > Thus to avoid further adding a bunch of workarounds for old/missing > bindings, make development of new platforms easier and allow to make > cleanup of the existing code and device tree files, lets mark some > Samsung Exynos SoC platform bindings as unstable. This means that > bindings can may change at any time and users should use the dtb file ^^^^^^^ you have a typo here, other than that I agree with the patch:
Acked-by: Andi Shyti <andi@etezian.org>
Thanks, Andi
| |