lkml.org 
[lkml]   [2018]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/7] spi: add slave device size in spi_device struct
Hi,

On Fri, 31 Aug 2018 15:59:58 +0530 Yogesh Gaur wrote:
> Add 'size' data variable in spi_device struct.
> This is to save the size of the connected slave device.
>
> After slave device scan, spi_nor_scan, size being assigned to this
> from MTD layer.
>
> SFDP read is being requested before completion of spi_nor_scan()
> routine, thus populate device size before making read request
> to the SPI controller.
>
> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
> ---
> drivers/mtd/devices/m25p80.c | 6 ++++++
> drivers/mtd/spi-nor/spi-nor.c | 2 ++
> include/linux/spi/spi.h | 2 ++
> 3 files changed, 10 insertions(+)
>
> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
> index fe260cc..6c7ad86 100644
> --- a/drivers/mtd/devices/m25p80.c
> +++ b/drivers/mtd/devices/m25p80.c
> @@ -124,6 +124,10 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
> /* convert the dummy cycles to the number of bytes */
> op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
>
> + /* for case of SFDP header read commands, populate spi device size */
> + if (flash->spimem->spi->size == 0)
> + flash->spimem->spi->size = nor->mtd.size;
> +
If the 'size' is an spimem specific variable it should be added to the
spi_mem struct rather than the spi_device struct.


Lothar Waßmann

\
 
 \ /
  Last update: 2018-08-31 13:59    [W:0.170 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site