lkml.org 
[lkml]   [2018]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 00/13] Copy Offload in NVMe Fabrics with P2P PCI Memory


On 30/08/18 01:20 PM, Jerome Glisse wrote:
> On Thu, Aug 30, 2018 at 12:53:39PM -0600, Logan Gunthorpe wrote:
>
> [...]
>
>>
>> When the PCI P2PDMA config option is selected the ACS bits in every
>> bridge port in the system are turned off to allow traffic to
>> pass freely behind the root port. At this time, the bit must be disabled
>> at boot so the IOMMU subsystem can correctly create the groups, though
>> this could be addressed in the future. There is no way to dynamically
>> disable the bit and alter the groups.

Oh, sorry this paragraph in the cover letter is wrong now. We now rely
on the disable_acs_redir command line option introduced in

aaca43fda742 ("PCI: Add "pci=disable_acs_redir=" parameter for
peer-to-peer support")


> Can you provide an example on how to test this ? Like kernel command
> line option, the doc patch does not have any such example. It would be
> nice to add.

Do you mean to test the patchset or the ACS bits you quoted?

Testing the patchset is a matter of having the right hardware (ie an
RDMA NIC and CMB enabled NVMe behind a PCIe switch, with the ACS bits
set correctly by the above command line option) and setting the p2pmem
configfs attribute in an nvme-of port to 'yes'.


Logan

\
 
 \ /
  Last update: 2018-08-30 21:31    [W:0.246 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site