lkml.org 
[lkml]   [2018]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH 05/31] usb: usbssp: Added first part of initialization sequence.
From
Date
Hi,

On 19/07/18 20:57, Pawel Laszczak wrote:
> Patch adds some initialization function. The initialization sequence
> is quite complicated and this patch implements it only partially.
> Initialization will be completed in next few patches.
>
> Patch introduce three new files:
> 1. gadget-dbg.c - file contains functions used for debugging purpose.
> 2. gadget-ext-caps.h - holds macro definition related to
> Extended Capabilities
> 3. gadget-if - file implements stuff related to upper layer
> (e.g usb_ep_ops, usb_gadget_ops interface).
>
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> ---
> drivers/usb/usbssp/Makefile | 1 +
> drivers/usb/usbssp/gadget-dbg.c | 30 ++++
> drivers/usb/usbssp/gadget-ext-caps.h | 53 ++++++
> drivers/usb/usbssp/gadget-if.c | 24 +++
> drivers/usb/usbssp/gadget.c | 242 +++++++++++++++++++++++++++
> drivers/usb/usbssp/gadget.h | 15 ++
> 6 files changed, 365 insertions(+)
> create mode 100644 drivers/usb/usbssp/gadget-dbg.c
> create mode 100644 drivers/usb/usbssp/gadget-ext-caps.h
> create mode 100644 drivers/usb/usbssp/gadget-if.c
>
> diff --git a/drivers/usb/usbssp/Makefile b/drivers/usb/usbssp/Makefile
> index d85f15afb51c..0606f3c63cd0 100644
> --- a/drivers/usb/usbssp/Makefile
> +++ b/drivers/usb/usbssp/Makefile
> @@ -5,6 +5,7 @@ CFLAGS_gadget-trace.o := -I$(src)
> obj-$(CONFIG_USB_USBSSP_GADGET) += usbssp.o
> usbssp-y := usbssp-plat.o gadget-ring.o \
> gadget.o
> + gadget-dbg.o
>
> ifneq ($(CONFIG_TRACING),)
> usbssp-y += gadget-trace.o
> diff --git a/drivers/usb/usbssp/gadget-dbg.c b/drivers/usb/usbssp/gadget-dbg.c
> new file mode 100644
> index 000000000000..277617d1a996
> --- /dev/null
> +++ b/drivers/usb/usbssp/gadget-dbg.c
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * USBSSP device controller driver
> + *
> + * Copyright (C) 2018 Cadence.
> + *
> + * Author: Pawel Laszczak
> + *
> + * A lot of code based on Linux XHCI driver.
> + * Origin: Copyright (C) 2008 Intel Corp
> + */
> +
> +#include "gadget.h"
> +
> +void usbssp_dbg_trace(struct usbssp_udc *usbssp_data,
> + void (*trace)(struct va_format *),
> + const char *fmt, ...)
> +{
> + struct va_format vaf;
> + va_list args;
> +
> + va_start(args, fmt);
> + vaf.fmt = fmt;
> + vaf.va = &args;
> + dev_dbg(usbssp_data->dev, "%pV\n", &vaf);

dev_dbg will mess up with timings to be useful.
Why not just use one of the trace events you defined in gadget-trace.h?

> + trace(&vaf);
> + va_end(args);
> +}
> +EXPORT_SYMBOL_GPL(usbssp_dbg_trace);
> +
> diff --git a/drivers/usb/usbssp/gadget-ext-caps.h b/drivers/usb/usbssp/gadget-ext-caps.h
> new file mode 100644
> index 000000000000..2bf327046376
> --- /dev/null
> +++ b/drivers/usb/usbssp/gadget-ext-caps.h
> @@ -0,0 +1,53 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * USBSSP device controller driver
> + *
> + * Copyright (C) 2018 Cadence.
> + *
> + * Author: Pawel Laszczak
> + *
> + * A lot of code based on Linux XHCI driver.
> + * Origin: Copyright (C) 2008 Intel Corp
> + */
> +
> +/* Up to 16 ms to halt an DC */
> +#define USBSSP_MAX_HALT_USEC (16*1000)
> +
> +/* DC not running - set to 1 when run/stop bit is cleared. */
> +#define USBSSP_STS_HALT BIT(0)
> +
> +/* HCCPARAMS offset from PCI base address */
> +#define USBSSP_HCC_PARAMS_OFFSET 0x10
> +/* HCCPARAMS contains the first extended capability pointer */
> +#define USBSSP_HCC_EXT_CAPS(p) (((p)>>16)&0xffff)
> +
> +/* Command and Status registers offset from the Operational Registers address */
> +#define USBSSP_CMD_OFFSET 0x00
> +#define USBSSP_STS_OFFSET 0x04
> +
> +/* Capability Register */
> +/* bits 7:0 - how long is the Capabilities register */
> +#define USBSSP_HC_LENGTH(p) (((p)>>00)&0x00ff)
> +
> +/* Extended capability register fields */
> +#define USBSSP_EXT_CAPS_ID(p) (((p)>>0)&0xff)
> +#define USBSSP_EXT_CAPS_NEXT(p) (((p)>>8)&0xff)
> +#define v_EXT_CAPS_VAL(p) ((p)>>16)
> +/* Extended capability IDs - ID 0 reserved */
> +#define USBSSP_EXT_CAPS_PROTOCOL 2
> +
> +/* USB 2.0 hardware LMP capability*/
> +#define USBSSP_HLC BIT(19)
> +#define USBSSP_BLC BIT(20)
> +
> +/* command register values to disable interrupts and halt the DC */
> +/* start/stop DC execution - do not write unless DC is halted*/
> +#define USBSSP_CMD_RUN BIT(0)
> +/* Event Interrupt Enable - get irq when EINT bit is set in USBSTS register */
> +#define USBSSP_CMD_EIE BIT(2)
> +/* Host System Error Interrupt Enable - get irq when HSEIE bit set in USBSTS */
> +#define USBSSP_CMD_HSEIE BIT(3)
> +/* Enable Wrap Event - '1' means DC generates an event when MFINDEX wraps. */
> +#define USBSSP_CMD_EWE BIT(10)
> +
> +#define USBSSP_IRQS (USBSSP_CMD_EIE | USBSSP_CMD_HSEIE | USBSSP_CMD_EWE)
> diff --git a/drivers/usb/usbssp/gadget-if.c b/drivers/usb/usbssp/gadget-if.c
> new file mode 100644
> index 000000000000..d53e0fb65299
> --- /dev/null
> +++ b/drivers/usb/usbssp/gadget-if.c
> @@ -0,0 +1,24 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * USBSSP device controller driver
> + *
> + * Copyright (C) 2018 Cadence.
> + *
> + * Author: Pawel Laszczak
> + *
> + */
> +
> +#include <linux/usb/gadget.h>
> +#include <linux/usb/composite.h>
> +#include "gadget.h"
> +
> +int usbssp_gadget_init_endpoint(struct usbssp_udc *usbssp_data)
> +{
> + /*TODO: it has to be implemented*/
> + return 0;
> +}
> +
> +void usbssp_gadget_free_endpoint(struct usbssp_udc *usbssp_data)
> +{
> + /*TODO: it has to be implemented*/
> +}
> diff --git a/drivers/usb/usbssp/gadget.c b/drivers/usb/usbssp/gadget.c
> index 2f60d7dd1fe4..338ec2ec18b1 100644
> --- a/drivers/usb/usbssp/gadget.c
> +++ b/drivers/usb/usbssp/gadget.c
> @@ -23,6 +23,107 @@
> #include "gadget-trace.h"
> #include "gadget.h"
>
> +
> +/*

/**

> + * usbssp_handshake - spin reading dc until handshake completes or fails
> + * @ptr: address of dc register to be read
> + * @mask: bits to look at in result of read
> + * @done: value of those bits when handshake succeeds
> + * @usec: timeout in microseconds
> + *
> + * Returns negative errno, or zero on success
> + *
> + * Success happens when the "mask" bits have the specified value (hardware
> + * handshake done). There are two failure modes: "usec" have passed (major
> + * hardware flakeout), or the register reads as all-ones (hardware removed).
> + */
> +int usbssp_handshake(void __iomem *ptr, u32 mask, u32 done, int usec)
> +{
> + u32 result;
> +
> + do {
> + result = readl(ptr);
> + if (result == ~(u32)0) /* card removed */
> + return -ENODEV;
> + result &= mask;
> + if (result == done)
> + return 0;
> + udelay(1);
> + usec--;
> + } while (usec > 0);
> + return -ETIMEDOUT;
> +}
> +
> +/*
> + * Disable interrupts and begin the DC halting process.
> + */
> +void usbssp_quiesce(struct usbssp_udc *usbssp_data)
> +{
> + u32 halted;
> + u32 cmd;
> + u32 mask;
> +
> + mask = ~(u32)(USBSSP_IRQS);
> +
> + halted = readl(&usbssp_data->op_regs->status) & STS_HALT;
> + if (!halted)
> + mask &= ~CMD_RUN;
> +
> + cmd = readl(&usbssp_data->op_regs->command);
> + cmd &= mask;
> + writel(cmd, &usbssp_data->op_regs->command);
> +}
> +
> +/*
> + * Force DC into halt state.
> + *
> + * Disable any IRQs and clear the run/stop bit.
> + * USBSSP will complete any current and actively pipelined transactions, and
> + * should halt within 16 ms of the run/stop bit being cleared.
> + * Read DC Halted bit in the status register to see when the DC is finished.
> + */
> +int usbssp_halt(struct usbssp_udc *usbssp_data)
> +{
> + int ret;
> +
> + usbssp_dbg_trace(usbssp_data, trace_usbssp_dbg_init,
> + "// Halt the USBSSP");
> + usbssp_quiesce(usbssp_data);
> +
> + ret = usbssp_handshake(&usbssp_data->op_regs->status,
> + STS_HALT, STS_HALT, USBSSP_MAX_HALT_USEC);
> +
> + if (!ret) {
> + dev_warn(usbssp_data->dev, "Device halt failed, %d\n", ret);
> + return ret;
> + }
> +
> + usbssp_data->usbssp_state |= USBSSP_STATE_HALTED;
> + usbssp_data->cmd_ring_state = CMD_RING_STATE_STOPPED;
> + return ret;
> +}
> +
> +
> +/*
> + * Initialize memory for gadget driver and USBSSP (one-time init).
> + *
> + * Program the PAGESIZE register, initialize the device context array, create
> + * device contexts, set up a command ring segment (or two?), create event
> + * ring (one for now).
> + */
> +int usbssp_init(struct usbssp_udc *usbssp_data)
> +{
> + int retval = 0;
> +
> + spin_lock_init(&usbssp_data->lock);
> + spin_lock_init(&usbssp_data->irq_thread_lock);
> +
> + /*TODO: memory initialization*/
> + //retval = usbssp_mem_init(usbssp_data, GFP_KERNEL);
> +
> + return retval;
> +}
> +
> #ifdef CONFIG_PM
> /*
> * Stop DC (not bus-specific)
> @@ -50,9 +151,146 @@ int usbssp_resume(struct usbssp_udc *usbssp_data, bool hibernated)
>
> #endif /* CONFIG_PM */
>
> +int usbssp_gen_setup(struct usbssp_udc *usbssp_data)
> +{
> + int retval;
> +
> + mutex_init(&usbssp_data->mutex);
> +
> + usbssp_data->cap_regs = usbssp_data->regs;
> + usbssp_data->op_regs = usbssp_data->regs +
> + HC_LENGTH(readl(&usbssp_data->cap_regs->hc_capbase));
> +
> + usbssp_data->run_regs = usbssp_data->regs +
> + (readl(&usbssp_data->cap_regs->run_regs_off) & RTSOFF_MASK);
> + /* Cache read-only capability registers */
> + usbssp_data->hcs_params1 = readl(&usbssp_data->cap_regs->hcs_params1);
> + usbssp_data->hcs_params2 = readl(&usbssp_data->cap_regs->hcs_params2);
> + usbssp_data->hcs_params3 = readl(&usbssp_data->cap_regs->hcs_params3);
> + usbssp_data->hcc_params = readl(&usbssp_data->cap_regs->hc_capbase);
> + usbssp_data->hci_version = HC_VERSION(usbssp_data->hcc_params);
> + usbssp_data->hcc_params = readl(&usbssp_data->cap_regs->hcc_params);
> + usbssp_data->hcc_params2 = readl(&usbssp_data->cap_regs->hcc_params2);
> +
> + /* Make sure the Device Controller is halted. */
> + retval = usbssp_halt(usbssp_data);
> + if (retval)
> + return retval;
> +
> + dev_dbg(usbssp_data->dev, "Resetting Device Controller\n");

do you really need all these dev_dbg prints? You should just fit them to one
of the trace event classes that you already have or add a new one if needed.

> + /* Reset the internal DC memory state and registers. */
> + /*TODO: add implementation of usbssp_reset function*/
> + //retval = usbssp_reset(usbssp_data);
> + if (retval)
> + return retval;
> + dev_dbg(usbssp_data->dev, "Reset complete\n");
> +
> + /* Set dma_mask and coherent_dma_mask to 64-bits,
> + * if USBSSP supports 64-bit addressing
> + */
> + if (HCC_64BIT_ADDR(usbssp_data->hcc_params) &&
> + !dma_set_mask(usbssp_data->dev, DMA_BIT_MASK(64))) {
> + dev_dbg(usbssp_data->dev, "Enabling 64-bit DMA addresses.\n");
> + dma_set_coherent_mask(usbssp_data->dev, DMA_BIT_MASK(64));
> + } else {
> + /*
> + * This is to avoid error in cases where a 32-bit USB
> + * controller is used on a 64-bit capable system.
> + */
> + retval = dma_set_mask(usbssp_data->dev, DMA_BIT_MASK(32));
> + if (retval)
> + return retval;
> + dev_dbg(usbssp_data->dev, "Enabling 32-bit DMA addresses.\n");
> + dma_set_coherent_mask(usbssp_data->dev, DMA_BIT_MASK(32));
> + }
> +
> + /* Initialize USBSSP controller data structures. */
> + retval = usbssp_init(usbssp_data);
> + if (retval)
> + return retval;
> +
> + dev_info(usbssp_data->dev, "USBSSP params 0x%08x USBSSP version 0x%x\n",
> + usbssp_data->hcc_params, usbssp_data->hci_version);
> +
> + return 0;
> +}
> +
> +/*
> + * gadget-if.c file is part of gadget.c file and implements interface
> + * for gadget driver
> + */
> +#include "gadget-if.c"
> +

All includes should be together at the beginning of the file.

> int usbssp_gadget_init(struct usbssp_udc *usbssp_data)
> {
> int ret;
> +
> + /*
> + * Check the compiler generated sizes of structures that must be laid
> + * out in specific ways for hardware access.
> + */
> + BUILD_BUG_ON(sizeof(struct usbssp_doorbell_array) != 2*32/8);
> + BUILD_BUG_ON(sizeof(struct usbssp_slot_ctx) != 8*32/8);
> + BUILD_BUG_ON(sizeof(struct usbssp_ep_ctx) != 8*32/8);
> + /* usbssp_device has eight fields, and also
> + * embeds one usbssp_slot_ctx and 31 usbssp_ep_ctx
> + */
> + BUILD_BUG_ON(sizeof(struct usbssp_stream_ctx) != 4*32/8);
> + BUILD_BUG_ON(sizeof(union usbssp_trb) != 4*32/8);
> + BUILD_BUG_ON(sizeof(struct usbssp_erst_entry) != 4*32/8);
> + BUILD_BUG_ON(sizeof(struct usbssp_cap_regs) != 8*32/8);
> + BUILD_BUG_ON(sizeof(struct usbssp_intr_reg) != 8*32/8);
> + /* usbssp_run_regs has eight fields and embeds 128 usbssp_intr_regs */
> + BUILD_BUG_ON(sizeof(struct usbssp_run_regs) != (8+8*128)*32/8);
> +
> + /* fill gadget fields */
> + /*TODO: implements usbssp_gadget_ops object*/
> + //usbssp_data->gadget.ops = &usbssp_gadget_ops;
> + usbssp_data->gadget.name = "usbssp-gadget";
> + usbssp_data->gadget.max_speed = USB_SPEED_SUPER_PLUS;
> + usbssp_data->gadget.speed = USB_SPEED_UNKNOWN;
> + usbssp_data->gadget.sg_supported = true;
> + usbssp_data->gadget.lpm_capable = 1;
> +
> + usbssp_data->setup_buf = kzalloc(USBSSP_EP0_SETUP_SIZE, GFP_KERNEL);
> + if (!usbssp_data->setup_buf)
> + return -ENOMEM;
> +
> + /*USBSSP support not aligned buffer but this option
> + * improve performance of this controller.
> + */

Multi-line comment formatting. Checkpach should complain.

> + usbssp_data->gadget.quirk_ep_out_aligned_size = true;
> + ret = usbssp_gen_setup(usbssp_data);
> + if (ret < 0) {
> + dev_err(usbssp_data->dev,
> + "Generic initialization failed with error code%d\n",
> + ret);
> + goto err3;
> + }
> +
> + ret = usbssp_gadget_init_endpoint(usbssp_data);
> + if (ret < 0) {
> + dev_err(usbssp_data->dev, "failed to initialize endpoints\n");
> + goto err1;
> + }
> +
> + ret = usb_add_gadget_udc(usbssp_data->dev, &usbssp_data->gadget);
> +
> + if (ret) {
> + dev_err(usbssp_data->dev, "failed to register udc\n");
> + goto err2;
> + }
> +
> + return ret;
> +err2:
> + usbssp_gadget_free_endpoint(usbssp_data);
> +err1:
> + usbssp_halt(usbssp_data);
> + /*TODO add implementation of usbssp_reset function*/
> + //usbssp_reset(usbssp_data);
> + /*TODO add implementation of freeing memory*/
> + //usbssp_mem_cleanup(usbssp_data);
> +err3:
> return ret;
> }
>
> @@ -60,5 +298,9 @@ int usbssp_gadget_exit(struct usbssp_udc *usbssp_data)
> {
> int ret = 0;
>
> + usb_del_gadget_udc(&usbssp_data->gadget);
> + usbssp_gadget_free_endpoint(usbssp_data);
> + /*TODO: add usbssp_stop implementation*/
> + //usbssp_stop(usbssp_data);
> return ret;
> }
> diff --git a/drivers/usb/usbssp/gadget.h b/drivers/usb/usbssp/gadget.h
> index 55e20795d900..5d8918f8da84 100644
> --- a/drivers/usb/usbssp/gadget.h
> +++ b/drivers/usb/usbssp/gadget.h
> @@ -12,8 +12,10 @@
> #ifndef __LINUX_USBSSP_GADGET_H
> #define __LINUX_USBSSP_GADGET_H
>
> +#include <linux/irq.h>
> #include <linux/io-64-nonatomic-lo-hi.h>
> #include <linux/usb/gadget.h>
> +#include "gadget-ext-caps.h"
>
> /* Max number slots - only 1 is allowed */
> #define DEV_MAX_SLOTS 1
> @@ -1676,7 +1678,18 @@ static inline void usbssp_write_64(struct usbssp_udc *usbssp_data,
> lo_hi_writeq(val, regs);
> }
>
> +/* USBSSP memory management */
> +void usbssp_dbg_trace(struct usbssp_udc *usbssp_data,
> + void (*trace)(struct va_format *),
> + const char *fmt, ...);

what has this function to do with memory management?

> /* USBSSP Device controller glue */
> +void usbssp_bottom_irq(struct work_struct *work);

usbssp_bottom_irq() wasn't defined in this patch.

> +int usbssp_init(struct usbssp_udc *usbssp_data);
> +void usbssp_stop(struct usbssp_udc *usbssp_data);
> +int usbssp_handshake(void __iomem *ptr, u32 mask, u32 done, int usec);
> +void usbssp_quiesce(struct usbssp_udc *usbssp_data);
> +extern int usbssp_reset(struct usbssp_udc *usbssp_data);
> +
> int usbssp_suspend(struct usbssp_udc *usbssp_data, bool do_wakeup);
> int usbssp_resume(struct usbssp_udc *usbssp_data, bool hibernated);
>
> @@ -1689,6 +1702,8 @@ dma_addr_t usbssp_trb_virt_to_dma(struct usbssp_segment *seg,
> /* USBSSP gadget interface*/
> int usbssp_gadget_init(struct usbssp_udc *usbssp_data);
> int usbssp_gadget_exit(struct usbssp_udc *usbssp_data);
> +void usbssp_gadget_free_endpoint(struct usbssp_udc *usbssp_data);
> +int usbssp_gadget_init_endpoint(struct usbssp_udc *usbssp_data);
>
> static inline char *usbssp_slot_state_string(u32 state)
> {
>

--
cheers,
-roger

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2018-08-03 12:18    [W:0.291 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site