lkml.org 
[lkml]   [2018]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 13/18] serial: intel: Replace clk_enable/clk_disable with clk generic API
Date
The clk driver has introduced new clock APIs that replace
the existing clk_enable and clk_disable.
-clk_enable() APIs is replaced with clk_prepare_enable().
-clk_disable() API is replaced with clk_disable_unprepare().

Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---

Changes in v2: None

drivers/tty/serial/lantiq.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 28086d52e980..36479d66fb7c 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -309,7 +309,7 @@ lqasc_startup(struct uart_port *port)
int retval;

if (!IS_ERR(ltq_port->clk))
- clk_enable(ltq_port->clk);
+ clk_prepare_enable(ltq_port->clk);
port->uartclk = clk_get_rate(ltq_port->freqclk);

asc_update_bits(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET),
@@ -377,7 +377,7 @@ lqasc_shutdown(struct uart_port *port)
asc_update_bits(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU,
port->membase + LTQ_ASC_TXFCON);
if (!IS_ERR(ltq_port->clk))
- clk_disable(ltq_port->clk);
+ clk_disable_unprepare(ltq_port->clk);
}

static void
@@ -631,7 +631,7 @@ lqasc_console_setup(struct console *co, char *options)
port = &ltq_port->port;

if (!IS_ERR(ltq_port->clk))
- clk_enable(ltq_port->clk);
+ clk_prepare_enable(ltq_port->clk);

port->uartclk = clk_get_rate(ltq_port->freqclk);

--
2.11.0
\
 
 \ /
  Last update: 2018-08-03 05:05    [W:0.234 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site