lkml.org 
[lkml]   [2018]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATH v5 0/4] gpiolib: speed up GPIO array processing
    Date

    The goal is to boost performance of get/set array functions while
    processing GPIO arrays which represent pins of a signle chip in
    hardware order. If resulting performance is close to PIO, GPIO API
    can be used for data I/O without much loss of speed.

    Created and tested on a low end Amstrad Delta board with NAND driver
    updated to use GPIO API for data I/O. Performance degrade compared to
    PIO is much better than before the optimization but still not quite
    satisfactory.

    Janusz Krzysztofik (4):
    gpiolib: Pass bitmaps, not integer arrays, to get/set array
    gpiolib: Identify arrays matching GPIO hardware
    gpiolib: Pass array info to get/set array functions
    gpiolib: Implement fast processing path in get/set array

    Changelog:
    v5:
    [PATCH v5 1/4] gpiolib: Pass bitmaps, not integer arrays, to get/set
    - drivers/i2c/muxes/i2c-mux-gpio.c:
    - drop assigment of values to struct gpiomux.values, as recommended
    by Peter Rosin - thanks!,
    - mark the .values member of the structure as obsolete,
    - drivers/mux/gpio.c:
    - drop assigment of values to struct mux_gpio.val, also recommended
    by Peter Rosin - thanks!,
    - merk the .val member of the structure as obsolete,
    - drivers/auxdisplay/hd44780.c:
    - fix incorrect bitmap size,
    - use >>= operator to simplify notation,
    both catched by Miguel Ojeda - thanks!,
    - add Cc: clauses as well as Acked-by: collected so far.
    [PATCH v5 2/4] gpiolib: Identify arrays matching GPIO hardware
    - add Cc: clause.
    [PATCH v5 3/4] gpiolib: Pass array info to get/set array functions
    - add Cc: clauses as well as Acked-by: collected so far.
    [PATCH v5 4/4] gpiolib: Implement fast processing path in get/set
    - add Cc: clause.

    v4:
    That series was a follow up of the former "mtd: rawnand: ams-delta: Use
    gpio-omap accessors for data I/O" which already contained some changes
    to gpiolib. Those previous attempts were commented by Borris Brezillon
    who suggested using GPIO API modified to accept bitmaps, and by Linus
    Walleij who suggested still more great ideas for further immprovement
    of the proposed API changes - thanks!

    diffstat:
    Documentation/driver-api/gpio/board.rst | 15 +
    Documentation/driver-api/gpio/consumer.rst | 48 +++-
    drivers/auxdisplay/hd44780.c | 64 +++---
    drivers/bus/ts-nbus.c | 25 --
    drivers/gpio/gpio-max3191x.c | 23 +-
    drivers/gpio/gpiolib.c | 279 ++++++++++++++++++++++------
    drivers/gpio/gpiolib.h | 15 +
    drivers/i2c/muxes/i2c-mux-gpio.c | 10 -
    drivers/mmc/core/pwrseq_simple.c | 15 -
    drivers/mux/gpio.c | 12 -
    drivers/net/phy/mdio-mux-gpio.c | 5
    drivers/pcmcia/soc_common.c | 14 -
    drivers/phy/motorola/phy-mapphone-mdm6600.c | 21 +-
    drivers/staging/iio/adc/ad7606.c | 12 -
    drivers/tty/serial/serial_mctrl_gpio.c | 9
    include/linux/gpio/consumer.h | 35 ++-
    16 files changed, 412 insertions(+), 190 deletions(-)

    \
     
     \ /
      Last update: 2018-08-29 22:48    [W:4.073 / U:0.224 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site