lkml.org 
[lkml]   [2018]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [PATCH] Revert "net: stmmac: Do not keep rearming the coalesce timer in stmmac_xmit"
    On Wed, Aug 29, 2018 at 8:03 PM Martin Blumenstingl
    <martin.blumenstingl@googlemail.com> wrote:
    [snip]
    > from that point on:
    > # dmesg | tail -n 4
    > [ 47.782778] RTL8211F Gigabit Ethernet 0.2009087f:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=0.2009087f:00, irq=30)
    > [ 47.803540] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
    > [ 47.805505] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
    > [ 50.311975] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
    I forgot to mention: after traffic doesn't flow anymore there are no
    additional messages in the kernel log
    thus the output of "dmesg | tail -n 4" is identical before and after
    the test run


    Regards
    Martin

    \
     
     \ /
      Last update: 2018-08-29 20:07    [W:2.660 / U:1.140 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site