lkml.org 
[lkml]   [2018]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] dt-bindings: net: dsa: Document B53 SRAB interrupts and registers
On Tue, Aug 28, 2018 at 10:54:19AM -0700, Florian Fainelli wrote:
> Document the Broadcom roboswitch Switch Register Access Block interrupt
> lines and additional register base addresses for port mux configuration
> and SGMII status/configuration registers.
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
> .../devicetree/bindings/net/dsa/b53.txt | 23 +++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
> index 1811e1972a7a..5f1029e853b8 100644
> --- a/Documentation/devicetree/bindings/net/dsa/b53.txt
> +++ b/Documentation/devicetree/bindings/net/dsa/b53.txt
> @@ -46,6 +46,29 @@ Required properties:
> "brcm,bcm6328-switch"
> "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
>
> +Required properties for BCM585xx/586xx/88312 SoCs:
> +
> + - reg: a total of 3 register base addresses, the first one must be the
> + Switch Register Access block base, the second is the port 5/4 mux
> + configuration register and the third one is the SGMII configuration
> + and status register base address.
> +
> + - interrupts: a total of 13 interrupts must be specified, in the following
> + order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
> + then the timestamping interrupt and the sleep timer interrupts for ports
> + 5,7,8.

Bulleted lists would be easier to read.

> +
> +Optional properties for BCM585xx/586xx/88312 SoCs:
> +
> + - reg-names: a total of 3 names matching the 3 base register address, must
> + be "srab", "mux_config" and "sgmii_config";

Here too, one per line please.

> +
> + - interrupt-names: a total of 13 names matching the 13 interrupts specified
> + must be: "link_state_p0", "link_state_p1", "link_state_p2",
> + "link_state_p3", "link_state_p4", "link_state_p5", "link_state_p7",
> + "link_state_p8", "phy", "ts", "imp_sleep_timer_p5", "imp_sleep_timer_p7",
> + "imp_sleep_timer_p8"
> +
> See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
> required and optional properties.
>
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2018-08-29 03:05    [W:0.056 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site