lkml.org 
[lkml]   [2018]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 00/11] Another round of tsens cleanups
Date
This is another series of tsens cleanups before we add interrupt support. This applies on top of 4.19-rc1.

In this series, we have the following:
- splitup 8916 and 8974 register address spaces for SROT and TM
- cleanups: move to spdx, dead code removal, removal of id field
- Add support to map the SROT address space for DTs that list it separately
- Check if TSENS IP is enabled in firmware by querying the SROT space
- Add reg-names property to get more readable outputs in /proc/iomem
- Add myself as maintainer of tsens

Changes since v1:
- Split up changes that split the address space and added qcom,sensors
property into two separate patches
- Remove brackets in typo correction patch

Amit Kucheria (11):
arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two
arm/arm64: dts: msm8974/msm8916: thermal: Add "qcom,sensors" property
dt-bindings: thermal: Fix a typo in documentation
thermal: tsens: Add SPDX license identifiers
thermal: tsens: Get rid of dead code
thermal: tsens: Rename map field in order to add a second address map
thermal: tsens: Add the SROT address map
thermal: tsens: Check if the IP is correctly enabled by firmware
thermal: tsens: Get rid of 'id' field
arm64: dts: qcom: Add reg-names for all tsens nodes
MAINTAINERS: Add entry for Qualcomm TSENS thermal drivers

.../devicetree/bindings/thermal/thermal.txt | 2 +-
MAINTAINERS | 7 +++
arch/arm/boot/dts/qcom-msm8974.dtsi | 7 ++-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 7 ++-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +
arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +
drivers/thermal/qcom/tsens-8916.c | 11 +---
drivers/thermal/qcom/tsens-8960.c | 41 +++++-------
drivers/thermal/qcom/tsens-8974.c | 11 +---
drivers/thermal/qcom/tsens-common.c | 62 ++++++++++++-------
drivers/thermal/qcom/tsens-v2.c | 6 +-
drivers/thermal/qcom/tsens.c | 21 +------
drivers/thermal/qcom/tsens.h | 24 +++----
13 files changed, 99 insertions(+), 104 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2018-08-28 15:39    [W:0.119 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site