lkml.org 
[lkml]   [2018]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/15] soc: octeontx2: Add RVU admin function driver
Date
From: Sunil Goutham <sgoutham@marvell.com>

Resource virtualization unit (RVU) on Marvell's OcteonTX2 SOC supports
multiple PCIe SRIOV physical functions (PFs) and virtual functions (VFs).
PF0 is called administrative / admin function (AF) and has privilege access
to registers to provision different RVU functional blocks to each of
PF/VF.

This admin function (AF) driver acts as a configuration / administrative
software which provisions functional blocks to a PF/VF on demand for them
to work as one of the following
- A basic network controller (i.e NIC).
- NIC with packet filtering, shaping and scheduling capabilities.
- A crypto device.
- A combination of above etc.

PF/VFs communicate with admin function via a shared memory region.
This patch series adds logic for the following
- RVU AF driver with functional blocks provisioning support
- Mailbox infrastructure for communication between AF and PFs.
- CGX driver which provides information about physcial network
interfaces which AF processes and forwards required info to
PF/VF drivers.

This is the first set of patches out of 70 odd patches.

Note: This driver neither receives any data nor processes it i.e no I/O,
just does the hardware configuration.

Aleksey Makarov (2):
soc: octeontx2: Add mailbox support infra
soc: octeontx2: Convert mbox msg id check to a macro

Geetha sowjanya (1):
soc: octeontx2: Reconfig MSIX base with IOVA

Linu Cherian (3):
soc: octeontx2: Set RVU PFs to CGX LMACs mapping
soc: octeontx2: Add support for CGX link management
soc: octeontx2: Register for CGX lmac events

Sunil Goutham (9):
soc: octeontx2: Add Marvell OcteonTX2 RVU AF driver
soc: octeontx2: Reset all RVU blocks
soc: octeontx2: Gather RVU blocks HW info
soc: octeontx2: Add mailbox IRQ and msg handlers
soc: octeontx2: Scan blocks for LFs provisioned to PF/VF
soc: octeontx2: Add RVU block LF provisioning support
soc: octeontx2: Configure block LF's MSIX vector offset
soc: octeontx2: Add Marvell OcteonTX2 CGX driver
MAINTAINERS: Add entry for Marvell OcteonTX2 Admin Function driver

MAINTAINERS | 10 +
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/marvell/Kconfig | 23 +
drivers/soc/marvell/Makefile | 2 +
drivers/soc/marvell/octeontx2/Makefile | 10 +
drivers/soc/marvell/octeontx2/cgx.c | 529 +++++++++
drivers/soc/marvell/octeontx2/cgx.h | 63 ++
drivers/soc/marvell/octeontx2/cgx_fw_if.h | 225 ++++
drivers/soc/marvell/octeontx2/mbox.c | 300 +++++
drivers/soc/marvell/octeontx2/mbox.h | 211 ++++
drivers/soc/marvell/octeontx2/rvu.c | 1625 ++++++++++++++++++++++++++++
drivers/soc/marvell/octeontx2/rvu.h | 158 +++
drivers/soc/marvell/octeontx2/rvu_cgx.c | 194 ++++
drivers/soc/marvell/octeontx2/rvu_reg.h | 442 ++++++++
drivers/soc/marvell/octeontx2/rvu_struct.h | 78 ++
16 files changed, 3872 insertions(+)
create mode 100644 drivers/soc/marvell/Kconfig
create mode 100644 drivers/soc/marvell/Makefile
create mode 100644 drivers/soc/marvell/octeontx2/Makefile
create mode 100644 drivers/soc/marvell/octeontx2/cgx.c
create mode 100644 drivers/soc/marvell/octeontx2/cgx.h
create mode 100644 drivers/soc/marvell/octeontx2/cgx_fw_if.h
create mode 100644 drivers/soc/marvell/octeontx2/mbox.c
create mode 100644 drivers/soc/marvell/octeontx2/mbox.h
create mode 100644 drivers/soc/marvell/octeontx2/rvu.c
create mode 100644 drivers/soc/marvell/octeontx2/rvu.h
create mode 100644 drivers/soc/marvell/octeontx2/rvu_cgx.c
create mode 100644 drivers/soc/marvell/octeontx2/rvu_reg.h
create mode 100644 drivers/soc/marvell/octeontx2/rvu_struct.h

--
2.7.4

\
 
 \ /
  Last update: 2018-08-28 12:59    [W:0.120 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site