lkml.org 
[lkml]   [2018]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] tty: serial: lpuart: avoid leaking struct tty_struct
Date
The function tty_port_tty_get() gets a reference to the tty. Since
the code is not using tty_port_tty_set(), the reference is kept
even after closing the tty.

Avoid using tty_port_tty_get() by directly access the tty instance.
Since lpuart_start_rx_dma() is called from the .startup() and
.set_termios() callback, it is safe to assume the tty instance is
valid.

Cc: stable@vger.kernel.org # v4.9+
Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx")
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
This fixes a memory leak observable when opening/closing the tty in a
loop. This is also reported by kmemleak:

unreferenced object 0xc9d17000 (size 1024):
comm "(agetty)", pid 389, jiffies 4294943045 (age 100.670s)
hex dump (first 32 bytes):
01 54 00 00 01 00 00 00 00 8c 9b c8 80 58 9b c8 .T...........X..
48 58 c4 c0 00 00 00 00 00 00 00 00 00 00 00 00 HX..............
backtrace:
[<(ptrval)>] kmem_cache_alloc_trace+0x160/0x2b8
[<(ptrval)>] alloc_tty_struct+0x44/0x254
[<(ptrval)>] tty_init_dev+0x44/0x1c8
[<(ptrval)>] tty_open+0x268/0x414
[<(ptrval)>] chrdev_open+0xb4/0x1bc
[<(ptrval)>] do_dentry_open+0x1c0/0x388
[<(ptrval)>] vfs_open+0x34/0x38
[<(ptrval)>] path_openat+0x5b0/0x11bc
[<(ptrval)>] do_filp_open+0x7c/0xe8
[<(ptrval)>] do_sys_open+0x188/0x20c
[<(ptrval)>] sys_openat+0x14/0x18
[<(ptrval)>] ret_fast_syscall+0x0/0x28
[<(ptrval)>] 0xbee0a460
[<(ptrval)>] 0xffffffff

I *think* the statement that accessing tty_struct without using
tty_port_tty_get is safe in this case is true. It would be good if
somebody with more TTY knowledge could review the change.

--
Stefan

drivers/tty/serial/fsl_lpuart.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 51e47a63d61a..3f8d1274fc85 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -979,7 +979,8 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport)
struct circ_buf *ring = &sport->rx_ring;
int ret, nent;
int bits, baud;
- struct tty_struct *tty = tty_port_tty_get(&sport->port.state->port);
+ struct tty_port *port = &sport->port.state->port;
+ struct tty_struct *tty = port->tty;
struct ktermios *termios = &tty->termios;

baud = tty_get_baud_rate(tty);
--
2.18.0
\
 
 \ /
  Last update: 2018-08-28 12:44    [W:0.025 / U:3.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site