lkml.org 
[lkml]   [2018]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1] arm64: dts: ls1043a: Add configure-gfladj property to USB3 node
Date
From: Rajesh Bhagat <rajesh.bhagat@freescale.com>

Add "configure-gfladj" boolean property to USB3 node. This property
is used to determine whether frame length adjustent is required or
not

Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index a830a2e..a3c5165 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -610,6 +610,7 @@
snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
dma-coherent;
+ configure-gfladj;
};

usb1: usb3@3000000 {
@@ -623,6 +624,7 @@
snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
dma-coherent;
+ configure-gfladj;
};

usb2: usb3@3100000 {
@@ -636,6 +638,7 @@
snps,dis-u1u2-when-u3-quirk;
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
dma-coherent;
+ configure-gfladj;
};

sata: sata@3200000 {
--
1.7.1
\
 
 \ /
  Last update: 2018-08-28 12:16    [W:0.025 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site