lkml.org 
[lkml]   [2018]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH 11/20] platform: goldfish: pipe: Replace two code blocks with a function call
From
From: Roman Kiryanov <rkir@google.com>

Two function calls look cleaner because the function introduces
takes case of all bit shifting and casting.

Signed-off-by: Roman Kiryanov <rkir@google.com>
---
drivers/platform/goldfish/goldfish_pipe.c | 35 ++++++++++++-----------
1 file changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/platform/goldfish/goldfish_pipe.c b/drivers/platform/goldfish/goldfish_pipe.c
index 3d28a9be5722..e3c09ff7867a 100644
--- a/drivers/platform/goldfish/goldfish_pipe.c
+++ b/drivers/platform/goldfish/goldfish_pipe.c
@@ -776,6 +776,14 @@ static struct miscdevice goldfish_pipe_miscdev = {
.fops = &goldfish_pipe_fops,
};

+static void write_pa_addr(void *addr, void __iomem *portl, void __iomem *porth)
+{
+ const unsigned long paddr = __pa(addr);
+
+ writel(upper_32_bits(paddr), porth);
+ writel(lower_32_bits(paddr), portl);
+}
+
static int goldfish_pipe_device_init(struct platform_device *pdev)
{
struct goldfish_pipe_dev *dev = &goldfish_pipe_dev;
@@ -816,22 +824,17 @@ static int goldfish_pipe_device_init(struct platform_device *pdev)
}

/* Send the buffer addresses to the host */
- {
- u64 paddr = __pa(&dev->buffers->signalled_pipe_buffers);
-
- writel((u32)(unsigned long)(paddr >> 32),
- dev->base + PIPE_REG_SIGNAL_BUFFER_HIGH);
- writel((u32)(unsigned long)paddr,
- dev->base + PIPE_REG_SIGNAL_BUFFER);
- writel((u32)MAX_SIGNALLED_PIPES,
- dev->base + PIPE_REG_SIGNAL_BUFFER_COUNT);
-
- paddr = __pa(&dev->buffers->open_command_params);
- writel((u32)(unsigned long)(paddr >> 32),
- dev->base + PIPE_REG_OPEN_BUFFER_HIGH);
- writel((u32)(unsigned long)paddr,
- dev->base + PIPE_REG_OPEN_BUFFER);
- }
+ write_pa_addr(&dev->buffers->signalled_pipe_buffers,
+ dev->base + PIPE_REG_SIGNAL_BUFFER,
+ dev->base + PIPE_REG_SIGNAL_BUFFER_HIGH);
+
+ writel((u32)MAX_SIGNALLED_PIPES,
+ dev->base + PIPE_REG_SIGNAL_BUFFER_COUNT);
+
+ write_pa_addr(&dev->buffers->open_command_params,
+ dev->base + PIPE_REG_OPEN_BUFFER,
+ dev->base + PIPE_REG_OPEN_BUFFER_HIGH);
+
return 0;
}

--
2.19.0.rc0.228.g281dcd1b4d0-goog
\
 
 \ /
  Last update: 2018-08-27 20:26    [W:0.104 / U:1.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site