Messages in this thread |  | | From | Rob Herring <> | Date | Sun, 26 Aug 2018 18:56:14 -0500 | Subject | Re: [PATCH 6/8] kbuild: consolidate Devicetree dtb build rules |
| |
On Sat, Aug 25, 2018 at 9:06 PM Masahiro Yamada <yamada.masahiro@socionext.com> wrote: > > Hi Rob, > > > 2018-08-22 6:55 GMT+09:00 Rob Herring <robh@kernel.org>: > > There is nothing arch specific about building dtb files other than their > > location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. > > The dependencies and supported targets are all slightly different. > > Also, a cross-compiler for each arch is needed, but really the host > > compiler preprocessor is perfectly fine for building dtbs. Move the > > build rules to a common location and remove the arch specific ones. This > > is done in a single step to avoid warnings about overriding rules. > > > > The build dependencies had been a mixture of 'scripts' and/or 'prepare'. > > These pull in several dependencies some of which need a target compiler > > (specifically devicetable-offsets.h) and aren't needed to build dtbs. > > All that is really needed is dtc, so adjust the dependencies to only be > > dtc. > > > > This change enables support 'dtbs_install' on some arches which were > > missing the target. > > > > Cc: Masahiro Yamada <yamada.masahiro@socionext.com> > > Cc: Michal Marek <michal.lkml@markovi.net> > > Cc: Vineet Gupta <vgupta@synopsys.com> > > Cc: Russell King <linux@armlinux.org.uk> > > Cc: Catalin Marinas <catalin.marinas@arm.com> > > Cc: Will Deacon <will.deacon@arm.com> > > Cc: Yoshinori Sato <ysato@users.sourceforge.jp> > > Cc: Michal Simek <monstr@monstr.eu> > > Cc: Ralf Baechle <ralf@linux-mips.org> > > Cc: Paul Burton <paul.burton@mips.com> > > Cc: James Hogan <jhogan@kernel.org> > > Cc: Ley Foon Tan <lftan@altera.com> > > Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> > > Cc: Paul Mackerras <paulus@samba.org> > > Cc: Michael Ellerman <mpe@ellerman.id.au> > > Cc: Chris Zankel <chris@zankel.net> > > Cc: Max Filippov <jcmvbkbc@gmail.com> > > Cc: linux-kbuild@vger.kernel.org > > Cc: linux-snps-arc@lists.infradead.org > > Cc: linux-arm-kernel@lists.infradead.org > > Cc: uclinux-h8-devel@lists.sourceforge.jp > > Cc: linux-mips@linux-mips.org > > Cc: nios2-dev@lists.rocketboards.org > > Cc: linuxppc-dev@lists.ozlabs.org > > Cc: linux-xtensa@linux-xtensa.org > > Signed-off-by: Rob Herring <robh@kernel.org> > > --- > > Makefile | 30 ++++++++++++++++++++++++++++++ > > arch/arc/Makefile | 6 ------ > > arch/arm/Makefile | 20 +------------------- > > arch/arm64/Makefile | 17 +---------------- > > arch/c6x/Makefile | 2 -- > > arch/h8300/Makefile | 11 +---------- > > arch/microblaze/Makefile | 4 +--- > > arch/mips/Makefile | 15 +-------------- > > arch/nds32/Makefile | 2 +- > > arch/nios2/Makefile | 7 ------- > > arch/nios2/boot/Makefile | 4 ---- > > arch/powerpc/Makefile | 3 --- > > arch/xtensa/Makefile | 12 +----------- > > scripts/Makefile | 1 - > > scripts/Makefile.lib | 2 +- > > 15 files changed, 38 insertions(+), 98 deletions(-) > > > > diff --git a/Makefile b/Makefile > > index c13f8b85ba60..6d89e673f192 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -1212,6 +1212,30 @@ kselftest-merge: > > $(srctree)/tools/testing/selftests/*/config > > +$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig > > > > +# --------------------------------------------------------------------------- > > +# Devicetree files > > + > > +dtstree := $(wildcard arch/$(SRCARCH)/boot/dts)
BTW, there's an error here too. It doesn't work right with KBUILD_OUTPUT set and should be:
ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/boot/dts/),) dtstree := arch/$(SRCARCH)/boot/dts endif
> > + > > +ifdef CONFIG_OF_EARLY_FLATTREE > > + > > +%.dtb %.dtb.S %.dtb.o: | dtc > > I think the pipe operator is unnecessary > because Kbuild will descend to $(dtstree) anyway.
The pipe means 'order-only', right? So it is just a weaker dependency for things which are not input files as dtc is not. The 'dtc' here is just the dtc rule below, not the actual executable. Or am I missing something?
> > + $(Q)$(MAKE) $(build)=$(dtstree) $(dtstree)/$@ > > + > > +PHONY += dtbs > > +dtbs: | dtc > > Ditto. > > > > + $(Q)$(MAKE) $(build)=$(dtstree) > > + > > +dtbs_install: dtbs > > + $(Q)$(MAKE) $(dtbinst)=$(dtstree) > > + > > +all: dtbs > > + > > +dtc: > > + $(Q)$(MAKE) $(build)=scripts/dtc > > + > > +endif > > + > > > arch/*/boot/dts/ are not only directories that > require dtc.
Ah yes, of course...
> > diff --git a/scripts/Makefile b/scripts/Makefile > > index 61affa300d25..a716a6b10954 100644 > > --- a/scripts/Makefile > > +++ b/scripts/Makefile > > @@ -39,7 +39,6 @@ build_unifdef: $(obj)/unifdef > > subdir-$(CONFIG_MODVERSIONS) += genksyms > > subdir-y += mod > > subdir-$(CONFIG_SECURITY_SELINUX) += selinux > > -subdir-$(CONFIG_DTC) += dtc > > subdir-$(CONFIG_GDB_SCRIPTS) += gdb > > > > # Let clean descend into subdirs
Looks like I need to leave this line to fix the above and cleaning.
Thanks for the review.
Rob
|  |