lkml.org 
[lkml]   [2018]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 21/22] KVM: s390: CPU model support for AP virtualization
From
Date
On 08/22/2018 07:19 AM, David Hildenbrand wrote:
> On 13.08.2018 23:48, Tony Krowiak wrote:
>> From: Tony Krowiak <akrowiak@linux.ibm.com>
>>
>> Introduces a new CPU model feature and two CPU model
>> facilities to support AP virtualization for KVM guests.
>>
>> CPU model feature:
>>
>> The KVM_S390_VM_CPU_FEAT_AP feature indicates that
>> AP instructions are available on the guest. This
>> feature will be enabled by the kernel only if the AP
>> instructions are installed on the linux host. This feature
>> must be specifically turned on for the KVM guest from
>> userspace to use the VFIO AP device driver for guest
>> access to AP devices.
>>
>> CPU model facilities:
>>
>> 1. AP Query Configuration Information (QCI) facility is installed.
>>
>> This is indicated by setting facilities bit 12 for
>> the guest. The kernel will not enable this facility
>> for the guest if it is not set on the host.
>>
>> If this facility is not set for the KVM guest, then only
>> APQNs with an APQI less than 16 will be used by a Linux
>> guest regardless of the matrix configuration for the virtual
>> machine. This is a limitation of the Linux AP bus.
>>
>> 2. AP Facilities Test facility (APFT) is installed.
>>
>> This is indicated by setting facilities bit 15 for
>> the guest. The kernel will not enable this facility for
>> the guest if it is not set on the host.
>>
>> If this facility is not set for the KVM guest, then no
>> AP devices will be available to the guest regardless of
>> the guest's matrix configuration for the virtual
>> machine. This is a limitation of the Linux AP bus.
>>
>> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
>> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
>> Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
>> Tested-by: Michael Mueller <mimu@linux.ibm.com>
>> Tested-by: Farhan Ali <alifm@linux.ibm.com>
>> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
>> ---
>> arch/s390/kvm/kvm-s390.c | 5 +++++
>> arch/s390/tools/gen_facilities.c | 2 ++
>> 2 files changed, 7 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
>> index 1e8cb67..d5e04d2 100644
>> --- a/arch/s390/kvm/kvm-s390.c
>> +++ b/arch/s390/kvm/kvm-s390.c
>> @@ -367,6 +367,11 @@ static void kvm_s390_cpu_feat_init(void)
>>
>> if (MACHINE_HAS_ESOP)
>> allow_cpu_feat(KVM_S390_VM_CPU_FEAT_ESOP);
>> +
>> + /* Check if AP instructions installed on host */
>> + if (ap_instructions_available())
>> + allow_cpu_feat(KVM_S390_VM_CPU_FEAT_AP);
>> +
>> /*
>> * We need SIE support, ESOP (PROT_READ protection for gmap_shadow),
>> * 64bit SCAO (SCA passthrough) and IDTE (for gmap_shadow unshadowing).
>> diff --git a/arch/s390/tools/gen_facilities.c b/arch/s390/tools/gen_facilities.c
>> index 90a8c9e..a52290b 100644
>> --- a/arch/s390/tools/gen_facilities.c
>> +++ b/arch/s390/tools/gen_facilities.c
>> @@ -106,6 +106,8 @@ struct facility_def {
>>
>> .name = "FACILITIES_KVM_CPUMODEL",
>> .bits = (int[]){
>> + 12, /* AP Query Configuration Information */
>> + 15, /* AP Facilities Test */
>> -1 /* END */
>> }
>> },
>>
> I really wonder if we should also export the APXA facility.

Given this comment is made within the context of the
FACILITIES_KVM_CPUMODEL I might point out that APXA is not
indicated by a facilities bit. It is indicated by a bit in
the QCI control block returned from the PQAP(QCI)
instruction to indicate that APXA is installed on all CPUs.

> We can probe and allow that CPU feature. However, we cannot disable it
> (as of now).

Given this patch series implements passthrough devices,
the output of the PQAP(QCI) will always be from a real
device - i.e., there will be no way to disable it.

>
> We have other CPU features where it is the same case (basically all
> subfunctions). See kvm_s390_get_processor_subfunc(). We probe them and
> export them, but support to disable them has never been implemented.
>
> On a high level, we could then e.g. deny to start a QEMU guest if APXA
> is available but has been disabled. (until we know that disabling it
> actually works - if ever).
>
> This helps to catch nasty migration bugs (e.g. APXA suddenly
> disappearing). Although unlikely, definitely possible.

Migration of AP devices is not supported by this patch series, so this
should
not be an issue.

>
>
> Are there any other AP related facilities that the guest can from now on
> probe that should also become part of the CPU model?
>

\
 
 \ /
  Last update: 2018-08-22 22:54    [W:0.195 / U:2.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site