Messages in this thread Patch in this message | | | From | Lubomir Rintel <> | Subject | [PATCH 02/14] dt-bindings: phy-pxa-usb: add bindings | Date | Wed, 22 Aug 2018 22:42:55 +0200 |
| |
This is the PHY chip for USB OTG on PXA platforms.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- .../devicetree/bindings/phy/phy-pxa-usb.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-pxa-usb.txt
diff --git a/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt new file mode 100644 index 000000000000..5b12ab44c9e6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-pxa-usb.txt @@ -0,0 +1,17 @@ +Marvell PXA USB PHY +------------------- + +Required properties: +- compatible: one of: "marvell,mmp2-usb-phy", "marvell,pxa910-usb-phy", + "marvell,pxa168-usb-phy", +- #phy-cells: must be 0 + +Example: + usb-phy: usbphy@d4207000 { + compatible = "marvell,mmp2-usb-phy"; + reg = <0xd4207000 0x40>; + #phy-cells = <0>; + status = "okay"; + }; +This document explains only the device tree data binding. For general +information about PHY subsystem refer to Documentation/phy.txt -- 2.17.1
| |