lkml.org 
[lkml]   [2018]   [Aug]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/9] CHROMIUM: v4l: Add H264 low-level decoder API compound controls.
On Wed, Aug 22, 2018 at 10:07 PM Paul Kocialkowski
<paul.kocialkowski@bootlin.com> wrote:
>
> Hi,
>
> On Tue, 2018-08-21 at 13:07 -0400, Nicolas Dufresne wrote:
> > Le mardi 21 août 2018 à 13:58 -0300, Ezequiel Garcia a écrit :
> > > On Wed, 2018-06-13 at 16:07 +0200, Maxime Ripard wrote:
> > > > From: Pawel Osciak <posciak@chromium.org>
> > > >
> > > > Signed-off-by: Pawel Osciak <posciak@chromium.org>
> > > > Reviewed-by: Wu-cheng Li <wuchengli@chromium.org>
> > > > Tested-by: Tomasz Figa <tfiga@chromium.org>
> > > > [rebase44(groeck): include linux/types.h in v4l2-controls.h]
> > > > Signed-off-by: Guenter Roeck <groeck@chromium.org>
> > > > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> > > > ---
> > > >
> > >
> > > [..]
> > > > diff --git a/include/uapi/linux/videodev2.h
> > > > b/include/uapi/linux/videodev2.h
> > > > index 242a6bfa1440..4b4a1b25a0db 100644
> > > > --- a/include/uapi/linux/videodev2.h
> > > > +++ b/include/uapi/linux/videodev2.h
> > > > @@ -626,6 +626,7 @@ struct v4l2_pix_format {
> > > > #define V4L2_PIX_FMT_H264 v4l2_fourcc('H', '2', '6', '4') /*
> > > > H264 with start codes */
> > > > #define V4L2_PIX_FMT_H264_NO_SC v4l2_fourcc('A', 'V', 'C', '1') /*
> > > > H264 without start codes */
> > > > #define V4L2_PIX_FMT_H264_MVC v4l2_fourcc('M', '2', '6', '4') /*
> > > > H264 MVC */
> > > > +#define V4L2_PIX_FMT_H264_SLICE v4l2_fourcc('S', '2', '6', '4') /*
> > > > H264 parsed slices */
> > >
> > > As pointed out by Tomasz, the Rockchip VPU driver expects start codes
> > > [1], so the userspace
> > > should be aware of it. Perhaps we could document this pixel format
> > > better as:
> > >
> > > #define V4L2_PIX_FMT_H264_SLICE v4l2_fourcc('S', '2', '6', '4') /*
> > > H264 parsed slices with start codes */
> > >
> > > And introduce another pixel format:
> > >
> > > #define V4L2_PIX_FMT_H264_SLICE_NO_SC v4l2_fourcc(TODO) /* H264
> > > parsed slices without start codes */
> > >
> > > For cedrus to use, as it seems it doesn't need start codes.
> >
> > I must admit that this RK requirement is a bit weird for slice data.
> > Though, userspace wise, always adding start-code would be compatible,
> > as the driver can just offset to remove it.
>
> This would mean that the stateless API no longer takes parsed bitstream
> data but effectively the full bitstream, which defeats the purpose of
> the _SLICE pixel formats.
>

Not entirely. One of the purposes of the _SLICE pixel format was to
specify it in a way that adds a requirement of providing the required
controls by the client.

> > Another option, because I'm not fan of adding dedicated formats for
> > this, the RK driver could use data_offset (in mplane v4l2 buffers),
> > just write a start code there. I like this solution because I would not
> > be surprise if some drivers requires in fact an HW specific header,
> > that the driver can generate as needed.
>
> I like this idea, because it implies that the driver should deal with
> the specificities of the hardware, instead of making the blurrying the
> lines of stateless API for covering these cases.

The spec says

"Offset in bytes to video data in the plane. Drivers must set this
field when type refers to a capture stream, applications when it
refers to an output stream."

which would mean that user space would have to know to reserve some
bytes at the beginning for the driver to add the start code there. (Or
the driver memmove()ing the data forward when the buffer is queued,
assuming that there is enough space in the buffer, but it should
normally be the case.)

Sounds like a pixel format with full bitstream data and some offsets
to particular parts inside given inside a control might be the most
flexible and cleanest solution.

Best regards,
Tomasz

\
 
 \ /
  Last update: 2018-08-22 15:40    [W:0.033 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site