[lkml]   [2018]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Enumeration issue with QCA9005 AR9462
On Mon, Aug 20, 2018 at 06:06:24PM -0500, Bjorn Helgaas wrote:
> reported a problem [1]: on v4.17, a QCA9005 AR9462
> wifi device was present at boot, but disappeared after suspend/resume.
> He also tested a recent kernel (5c60a7389d79, from Thu Aug 16),
> where the suspend/resume problem doesn't seem to happen, but the wifi
> device isn't enumerated correctly at boot-time.
> [ 0.928714] pciehp 0000:04:00.0:pcie204: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
> [ 0.928752] pciehp 0000:04:00.0:pcie204: Slot(0-1): Card not present
> [ 0.928811] pciehp 0000:04:00.0:pcie204: Slot(0-1): Link Up
> [ 0.928815] pciehp 0000:04:00.0:pcie204: Slot(0-1): No adapter
> [1]
> [2]

The hardware appears to be broken in that the Presence Detect State bit
in the Slot Status register is 0 (Slot Empty) even though the slot is

Thus, as of v4.19, pciehp will initially consider the slot to be in
ON_STATE when it probes (because there are enumerated children).
It then looks at the PDS bit, sees that it's 0, believes that there
is no longer anything in the slot and synthesizes a Presence Detect
Changed event to bring down the slot. The IRQ thread then removes
the device in the slot, sees that the link is up, tries to bring the
slot up again, but that fails because __pciehp_enable_slot() complains
that the Presence Detect State bit isn't set ("No adapter").

The slot is then considered to be in OFF_STATE by pciehp, even though
the rescan made the device reappear behind pciehp's back. On resume
from system sleep, pciehp sees that the Presence Detect State bit
in the Slot Status register is still 0, and because it's already in
OFF_STATE, there's nothing to do.

Up until v4.18, an unoccupied slot was only brought down on resume:

/* Check if slot is occupied */
pciehp_get_adapter_status(slot, &status);
if (status)

From v4.19, this is now also done on probe for consistency.

The above hypothesis is confirmed by the lspci -vv output:

LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+ BWMgmt+ ABWMgmt-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-

Possible solutions:

(a) Be lenient towards broken hardware and accept DLActive+ as a proxy
for PresDet+.

(b) Add a blacklist to pciehp such that it doesn't bind to [1ae9:0200].
The bug reporter writes that "it's a single Half Mini PCIe card,
with two chipsets (Wil6110? + AR9462) combined by a PCIe hub".
This sounds like it's not really hotpluggable.
(Is Mini PCIe hotplug capable at all?)

Let me go through the driver and see if (a) is feasible and how intrusive
it would be.



 \ /
  Last update: 2018-08-21 07:47    [W:0.041 / U:0.436 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site