lkml.org 
[lkml]   [2018]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] dmaengine: xilinx_dma: Fix 64-bit simple CDMA transfer
On 27-07-18, 16:20, Radhey Shyam Pandey wrote:
> In AXI CDMA simple mode also pass MSB bits of source and destination
> address to xilinx_write function. This fixes simple CDMA operation
> mode using 64-bit addressing.
>
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
> drivers/dma/xilinx/xilinx_dma.c | 6 ++++--
> 1 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index a37871e..2e15d86 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -1245,8 +1245,10 @@ static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
>
> hw = &segment->hw;
>
> - xilinx_write(chan, XILINX_CDMA_REG_SRCADDR, hw->src_addr);
> - xilinx_write(chan, XILINX_CDMA_REG_DSTADDR, hw->dest_addr);
> + xilinx_write(chan, XILINX_CDMA_REG_SRCADDR, (dma_addr_t)
> + ((u64)hw->src_addr_msb << 32 | hw->src_addr));

so this is:
(dma_addr_t)((u64)hw->src_addr_msb << 32 | hw->src_addr)

what is src_addr data type? I think its u32. It would be better to
update xilinx_write() to take u64 and not dma_addr_t.


> + xilinx_write(chan, XILINX_CDMA_REG_DSTADDR, (dma_addr_t)
> + ((u64)hw->dest_addr_msb << 32 | hw->dest_addr));
>
> /* Start the transfer */
> dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
> --
> 1.7.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe dmaengine" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
~Vinod

\
 
 \ /
  Last update: 2018-08-21 17:56    [W:0.116 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site