lkml.org 
[lkml]   [2018]   [Aug]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/8] mtd: maps: gpio-addr-flash: Replace array with an integer
Date
By replacing the array with an integer we can avoid completely
the bit comparison loop if the value has not changed (by far
the most common case).

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
drivers/mtd/maps/gpio-addr-flash.c | 31 +++++++++++++++---------------
1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
index 22e100f07112..8f5e3dce9be3 100644
--- a/drivers/mtd/maps/gpio-addr-flash.c
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -43,7 +43,7 @@ struct async_state {
struct map_info map;
size_t gpio_count;
unsigned *gpio_addrs;
- int *gpio_values;
+ unsigned int gpio_values;
unsigned int win_order;
};
#define gf_map_info_to_state(mi) ((struct async_state *)(mi)->map_priv_1)
@@ -55,22 +55,25 @@ struct async_state {
*
* Rather than call the GPIO framework every time, cache the last-programmed
* value. This speeds up sequential accesses (which are by far the most common
- * type). We rely on the GPIO framework to treat non-zero value as high so
- * that we don't have to normalize the bits.
+ * type).
*/
static void gf_set_gpios(struct async_state *state, unsigned long ofs)
{
- size_t i = 0;
- int value;
+ int i;

ofs >>= state->win_order;
- do {
- value = ofs & (1 << i);
- if (state->gpio_values[i] != value) {
- gpio_set_value(state->gpio_addrs[i], value);
- state->gpio_values[i] = value;
- }
- } while (++i < state->gpio_count);
+
+ if (ofs == state->gpio_values)
+ return;
+
+ for (i = 0; i < state->gpio_count; i++) {
+ if ((ofs & BIT(i)) == (state->gpio_values & BIT(i)))
+ continue;
+
+ gpio_set_value(state->gpio_addrs[i], !!(ofs & BIT(i)));
+ }
+
+ state->gpio_values = ofs;
}

/**
@@ -215,7 +218,7 @@ static int gpio_flash_probe(struct platform_device *pdev)
if (!memory || !gpios || !gpios->end)
return -EINVAL;

- arr_size = sizeof(int) * gpios->end;
+ arr_size = sizeof(state->gpio_addrs[0]) * gpios->end;
state = devm_kzalloc(&pdev->dev, sizeof(*state) + arr_size, GFP_KERNEL);
if (!state)
return -ENOMEM;
@@ -226,9 +229,7 @@ static int gpio_flash_probe(struct platform_device *pdev)
*/
state->gpio_count = gpios->end;
state->gpio_addrs = (void *)(unsigned long)gpios->start;
- state->gpio_values = (void *)(state + 1);
state->win_order = get_bitmask_order(resource_size(memory)) - 1;
- memset(state->gpio_values, 0xff, arr_size);

state->map.name = DRIVER_NAME;
state->map.read = gf_read;
--
2.18.0
\
 
 \ /
  Last update: 2018-08-21 16:33    [W:0.080 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site