lkml.org 
[lkml]   [2018]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] scsi: ufs: Make sysfs flags writable
Date
This change makes the UFS controller's sysfs flags writable. This
will enable users to provision unprovisioned devices, and experiment
with device features.

Signed-off-by: Evan Green <evgreen@chromium.org>
---
This is a follow-on patch to another patch [1] that makes the UFS attributes
writable.

[1] https://lore.kernel.org/patchwork/patch/972959/

Documentation/ABI/testing/sysfs-driver-ufs | 18 +++++++---
drivers/scsi/ufs/ufs-sysfs.c | 54 +++++++++++++++++++++++++-----
2 files changed, 58 insertions(+), 14 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index 016724ec26d5..6df8ccbc94f3 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -619,7 +619,6 @@ Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the device init status. The full information
about the flag could be found at UFS specifications 2.1.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe
Date: February 2018
@@ -627,7 +626,8 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether permanent write protection is enabled.
The full information about the flag could be found at
UFS specifications 2.1.
- The file is read only.
+ Warning: This flag can only be written one time within the
+ lifetime of the device. Once set, it cannot be unset.

What: /sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe
Date: February 2018
@@ -636,7 +636,7 @@ Description: This file shows whether write protection is enabled on all
logical units configured as power on write protected. The
full information about the flag could be found at
UFS specifications 2.1.
- The file is read only.
+ Once set, this flag cannot be cleared without a device reset.

What: /sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable
Date: February 2018
@@ -644,7 +644,6 @@ Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether the device background operations are
enabled. The full information about the flag could be
found at UFS specifications 2.1.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable
Date: February 2018
@@ -654,13 +653,22 @@ Description: This file shows whether the device life span mode is enabled.
UFS specifications 2.1.
The file is read only.

+What: /sys/bus/platform/drivers/ufshcd/*/flags/purge_enable
+Date: August 2018
+Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
+Description: This file shall only be set when the command queue of all
+ logical units are empty and purge status is idle. This flag is
+ automatically cleared by the UFS device when the operation
+ completes or an error occurs. This flag is write-only, it
+ cannot be read. Complete information about the flag can be
+ found in the UFS specification 2.20A.
+
What: /sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows whether physical resource removal is enable.
The full information about the flag could be found at
UFS specifications 2.1.
- The file is read only.

What: /sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc
Date: February 2018
diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
index 8d9332bb7d0c..2da927f4b7ff 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/scsi/ufs/ufs-sysfs.c
@@ -616,7 +616,7 @@ static const struct attribute_group ufs_sysfs_string_descriptors_group = {
.attrs = ufs_sysfs_string_descriptors,
};

-#define UFS_FLAG(_name, _uname) \
+#define UFS_FLAG_SHOW(_name, _uname) \
static ssize_t _name##_show(struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
@@ -626,17 +626,52 @@ static ssize_t _name##_show(struct device *dev, \
QUERY_FLAG_IDN##_uname, &flag)) \
return -EINVAL; \
return sprintf(buf, "%s\n", flag ? "true" : "false"); \
+}
+
+#define UFS_FLAG_STORE(_name, _uname) \
+static ssize_t _name##_store(struct device *dev, \
+ struct device_attribute *attr, const char *buf, \
+ size_t count) \
+{ \
+ bool flag; \
+ struct ufs_hba *hba = dev_get_drvdata(dev); \
+ enum query_opcode op; \
+ if (kstrtobool(buf, &flag)) \
+ return -EINVAL; \
+ op = flag ? UPIU_QUERY_OPCODE_SET_FLAG : \
+ UPIU_QUERY_OPCODE_CLEAR_FLAG; \
+ if (ufshcd_query_flag(hba, op, QUERY_FLAG_IDN##_uname, NULL)) \
+ return -EINVAL; \
+ return count; \
} \
+
+#define UFS_FLAG_RO(_name, _uname) \
+UFS_FLAG_SHOW(_name, _uname) \
static DEVICE_ATTR_RO(_name)

-UFS_FLAG(device_init, _FDEVICEINIT);
-UFS_FLAG(permanent_wpe, _PERMANENT_WPE);
-UFS_FLAG(power_on_wpe, _PWR_ON_WPE);
-UFS_FLAG(bkops_enable, _BKOPS_EN);
-UFS_FLAG(life_span_mode_enable, _LIFE_SPAN_MODE_ENABLE);
-UFS_FLAG(phy_resource_removal, _FPHYRESOURCEREMOVAL);
-UFS_FLAG(busy_rtc, _BUSY_RTC);
-UFS_FLAG(disable_fw_update, _PERMANENTLY_DISABLE_FW_UPDATE);
+#define UFS_FLAG_WO(_name, _uname) \
+UFS_FLAG_STORE(_name, _uname) \
+static ssize_t _name##_show(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ return -EOPNOTSUPP; \
+} \
+static DEVICE_ATTR_RW(_name)
+
+#define UFS_FLAG_RW(_name, _uname) \
+UFS_FLAG_SHOW(_name, _uname) \
+UFS_FLAG_STORE(_name, _uname) \
+static DEVICE_ATTR_RW(_name)
+
+UFS_FLAG_RW(device_init, _FDEVICEINIT);
+UFS_FLAG_RW(permanent_wpe, _PERMANENT_WPE);
+UFS_FLAG_RW(power_on_wpe, _PWR_ON_WPE);
+UFS_FLAG_RW(bkops_enable, _BKOPS_EN);
+UFS_FLAG_RO(life_span_mode_enable, _LIFE_SPAN_MODE_ENABLE);
+UFS_FLAG_WO(purge_enable, _PURGE_ENABLE);
+UFS_FLAG_RW(phy_resource_removal, _FPHYRESOURCEREMOVAL);
+UFS_FLAG_RO(busy_rtc, _BUSY_RTC);
+UFS_FLAG_RO(disable_fw_update, _PERMANENTLY_DISABLE_FW_UPDATE);

static struct attribute *ufs_sysfs_device_flags[] = {
&dev_attr_device_init.attr,
@@ -644,6 +679,7 @@ static struct attribute *ufs_sysfs_device_flags[] = {
&dev_attr_power_on_wpe.attr,
&dev_attr_bkops_enable.attr,
&dev_attr_life_span_mode_enable.attr,
+ &dev_attr_purge_enable.attr,
&dev_attr_phy_resource_removal.attr,
&dev_attr_busy_rtc.attr,
&dev_attr_disable_fw_update.attr,
--
2.16.4
\
 
 \ /
  Last update: 2018-08-20 23:35    [W:0.032 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site