[lkml]   [2018]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] r8169: don't use MSI-X on RTL8106e
On 20.08.2018 22:40, Florian Fainelli wrote:
> On 08/16/2018 12:50 PM, Heiner Kallweit wrote:
>> On 16.08.2018 21:39, David Miller wrote:
>>> From: Heiner Kallweit <>
>>> Date: Thu, 16 Aug 2018 21:37:31 +0200
>>>> On 16.08.2018 21:21, David Miller wrote:
>>>>> From: <>
>>>>> Date: Wed, 15 Aug 2018 14:21:10 +0800
>>>>>> Found the ethernet network on ASUS X441UAR doesn't come back on resume
>>>>>> from suspend when using MSI-X. The chip is RTL8106e - version 39.
>>>>> Heiner, please take a look at this.
>>>>> You recently disabled MSI-X on RTL8168g for similar reasons.
>>>>> Now that we've seen two chips like this, maybe there is some other
>>>>> problem afoot.
>>>> Thanks for the hint. I saw it already and just contacted Realtek
>>>> whether they are aware of any MSI-X issues with particular chip
>>>> versions. With the chip versions I have access to MSI-X works fine.
>>>> There's also the theoretical option that the issues are caused by
>>>> broken BIOS's. But so far only chip versions have been reported
>>>> which are very similar, at least with regard to version number
>>>> (2x VER_40, 1x VER_39). So they may share some buggy component.
>>>> Let's see whether Realtek can provide some hint.
>>>> If more chip versions are reported having problems with MSI-X,
>>>> then we could switch to a whitelist or disable MSI-X in general.
>>> It could be that we need to reprogram some register(s) on resume,
>>> which normally might not be needed, and that is what is causing the
>>> problem with some chips.
>> Indeed. That's what I'm checking with Realtek.
>> In the register list in the r8169 driver there's one entry which
>> seems to indicate that there are MSI-X specific settings.
>> However this register isn't used, and the r8168 vendor driver
>> uses only MSI. And there are no public datasheets.
> Stupid question, but should not we be asking the reporter to try again with:
> applied? The original report shows the Generic PHY being used, not the
> Realtek PHY driver being used, is this possibly contributing to the problem?
I don't think it's related, because falling back to MSI fixes the issue for
the reporter. And some chip versions report a generic Realtek PHY ID which
isn't covered by any Realtek PHY driver. These chip versions seem to work
fine with the generic PHY driver. So he may have Realtek PHY drivers enabled
or not. But indeed, would be good to have this info to get the full picture.

See also the mail I wrote few minutes ago, there it's described what we know
about the reason of the MSI-X issue so far.

 \ /
  Last update: 2018-08-20 22:57    [W:0.105 / U:1.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site