lkml.org 
[lkml]   [2018]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v8 1/2] PCI: pciehp: Ignore link events when there is a fatal error pending
On Mon, Aug 20, 2018 at 12:59:05PM -0400, Sinan Kaya wrote:
> On 8/20/2018 5:22 AM, Lukas Wunner wrote:
> > > +
> > This differs from v7 of the patch in that*any* fatal error, not just
> > a Surprise Link Down, results in pciehp waiting for the error to clear.
> >
> > I'm wondering if that's safe: Theoretically, the user might quickly
> > swap the card in the slot during, say, a Completion Timeout Error,
> > and with this patch pciehp would carry on as if nothing happened.
>
> Functionally both patches are identical. The v7 was still allowing
> AER/DPC to handle all fatal error events except Surprise Link Down.
>
> Now, second patch (v8 2/2) is masking the surprise link down event
> as we have talked before. Therefore, there is no need to filter
> out incoming errors by reading the status register and masking the
> unwanted bits.

Ok, missed that.


> Just to clarify something, this patch will wait for only the FATAL
> error events to be handled by the error handling services only.
>
> Completion Timeout is a NONFATAL error event by default unless
> somebody tweaks the severity bits.
>
> Anyhow, all FATAL errors cause one sort of link down either
> initiated by software (AER) or hardware (DPC).
> Therefore, hotplug driver will observe a link down event and
> AER/DPC needs to handle the event as usual.

Thanks for the clarification.

Lukas

\
 
 \ /
  Last update: 2018-08-20 19:30    [W:0.446 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site