lkml.org 
[lkml]   [2018]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/7] dt-bindings: Add DT bindings documentation for Allwinner Thermal Sensor Controller
On Mon, 20 Aug 2018 16:07:37 +0200
Maxime Ripard <maxime.ripard@bootlin.com> wrote:

> On Mon, Aug 20, 2018 at 07:41:22AM -0600, Rob Herring wrote:
> > On Mon, Aug 20, 2018 at 5:17 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > >
> > > On Sat, Aug 04, 2018 at 09:03:49AM +0200, Emmanuel Vadot wrote:
> > > > This patch adds documentation for Device-Tree bindings for the Allwinner
> > > > Thermal Sensor Controller found on the H3, H5 and A64 SoCs
> > > >
> > > > Signed-off-by: Emmanuel Vadot <manu@freebsd.org>
> > >
> > > I'm not going to merge a binding for a device that doesn't have any
> > > driver implemented at the moment in Linux.
> >
> > I'll take it then. Linux is not the only DT client.
>
> Then don't complain if we ever have to break the ABI. We never tested
> that hardware, never had any code running on it, and it *will* cause
> some issues. For example, the calibration data have never been used
> and how they should be represented have never been described, since no
> one ever actually tried to use it.
>
> And sure, Linux is not the only DT client. Just like FreeBSD isn't.
>
> Maxime

Maxime,

What kind of data would you need for me to make things better ?
We have the driver in FreeBSD for almost two years now, whne I started
to see how to upstream it I noticed a lot of problems and spent 4 or 5
days to try on all the SoCs mentionned in the serie, the only SoC I
didn't include it the A83T as for some reason I couldn't make the
driver work.
I just hope that you understand that we cannot wait for Linux to have
a driver to have some bindings.

Cheers,

--
Emmanuel Vadot <manu@bidouilliste.com> <manu@freebsd.org>

\
 
 \ /
  Last update: 2018-08-20 16:27    [W:0.111 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site