lkml.org 
[lkml]   [2018]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH 1/6] Revert "PCI: Fix is_added/is_busmaster race condition"
On Mon, Aug 20, 2018 at 4:39 PM, Benjamin Herrenschmidt
<benh@kernel.crashing.org> wrote:
> On Mon, 2018-08-20 at 11:55 +0530, Hari Vyas wrote:
>> On Mon, Aug 20, 2018 at 7:40 AM, Benjamin Herrenschmidt
>> <benh@kernel.crashing.org> wrote:
>> > On Sat, 2018-08-18 at 21:24 -0500, Bjorn Helgaas wrote:
>> > > On Sat, Aug 18, 2018 at 01:24:51PM +1000, Benjamin Herrenschmidt wrote:
>> > > > On Fri, 2018-08-17 at 10:44 -0500, Bjorn Helgaas wrote:
>> > > > > On Fri, Aug 17, 2018 at 02:48:57PM +1000, Benjamin Herrenschmidt wrote:
>> > > > > > This reverts commit 44bda4b7d26e9fffed6d7152d98a2e9edaeb2a76.
>> > > > >
>> > > > > Just to be clear, if I understand correctly, this is a pure revert of
>> > > > > 44bda4b7d26e and as such it reintroduces the problem solved by that
>> > > > > commit.
>> > > > >
>> > > > > If your solution turns out to be better, that's great, but it would be
>> > > > > nice to avoid the bisection hole of reintroducing the problem, then
>> > > > > fixing it again later.
>> > > >
>> > > > There is no way to do that other than merging the revert and the fix
>> > > > into one. That said, the race is sufficiently hard to hit that I
>> > > > wouldn't worry too much about it.
>> > >
>> > > OK, then at least mention that in the changelog.
>> >
>> > Sure will do. This is just RFC at this stage :-)
>> >
>> > As for the race with enable, what's your take on my approach ? The
>> > basic premise is that we need some kind of mutex to make the updates to
>> > enable_cnt and the actual config space changes atomic. While at it we
>> > can fold pci_set_master vs. is_busmaster as well as those are racy too.
>> >
>> > I chose to create a new mutex which we should be able to address other
>> > similar races if we find them. The other solutions that I dismissed
>> > were:
>> >
>> > - Using the device_lock. A explained previously, this is tricky, I
>> > prefer not using this for anything other than locking against
>> > concurrent add/remove. The main issue is that drivers will be sometimes
>> > called in context where that's already held, so we can't take it inside
>> > pci_enable_device() and I'd rather not add new constraints such as
>> > "pci_enable_device() must be only called from probe() unless you also
>> > take the device lock". It would be tricky to audit everybody...
>> >
>> > - Using a global mutex. We could move the bridge lock from AER to core
>> > code for example, and use that. But it doesn't buy us much, and
>> > slightly redecuces parallelism. It also makes it a little bit more
>> > messy to walk up the bridge chain, we'd have to do a
>> > pci_enable_device_unlocked or something, messy.
>> >
>> > So are you ok with the approach ? Do you prefer one of the above
>> > regardless ? Something else ?
>> >
>> > Cheers,
>> > Ben.
>> >
>> >
>>
>> Some concern was raised about race situation so just to be more clear
>> about race condition.
>
> This is not what the above discussion is about.
>
> The race with is is_added is due to the fact that the bit is set too
> later as discussed previously and in my changelog.
>
> The race I'm talking about here is the race related to multiple
> subtrees trying to simultaneously enable a parent bridge.
>
>> Situation is described in Bug 200283 - PCI: Data corruption happening
>> due to a race condition.
>> Issue was discovered by our broadcom QA team.
>> Initially commit was to use one separate lock only for avoiding race
>> condition but after review, approach was slightly changed to move
>> is_added to pci_dev private flags as it was completely
>> internal/private variable of pci core driver.
>> Powerpc legacy arch code was using is_added flag directly which looks
>> bit strange so ../../ type of inclusion of pci.h was required. I know
>> it looks ugly but it is being used in some legacy code still.
>> Anyway, as stated earlier too, problem should be just solved in better way.
>
> The is_added race can be fixed with a 3 lines patch moving is_added up
> to before device_attach() I believe. I yet have to find a scenario
> where doing so would break something but it's possible that I missed a
> case.
>
> At this stage, I'm more intested however in us agreeing how to fix the
> other race, the one with enabling. As I wrote above, I proposed an
> approach based on a mutex in pci_dev, and this is what I would like
> discussed.
>
> This race is currently causing our large systems to randomly error out
> at boot time when probing some PCIe devices. I'm putting a band-aid in
> the powerpc code for now to pre-enable bridges at boot, but I'd rather
> have the race fixed in the generic code.
>
> Ben.
>
>
I was initially using spin lock in
"PATCH v1] PCI: Data corruption happening due to race condition" and didn't
face issue at-least in our environment for our race condition.
Anyway, we can leave this minor is_added issue time-being and concentrate on
current pci bridge concern. Could you re-share your latest patch in
your environment
and your first doubt where race situation could happen. May be forum
can suggest
some-thing good.


Regard,
hari.

\
 
 \ /
  Last update: 2018-08-20 13:44    [W:0.329 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site