lkml.org 
[lkml]   [2018]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 2/3] i2c: imx: Simplify stopped state tracking
Date
Wolfram Sang <wsa@the-dreams.de> writes:

> On Thu, Aug 16, 2018 at 10:43:13AM +0200, Esben Haabendal wrote:
>> From: Esben Haabendal <eha@deif.com>
>>
>> Always update the stopped state when busy status have been checked.
>> This is identical to what was done before, with the exception of error
>> handling.
>> Without this change, some errors cause the stopped state to be left in
>> incorrect state in i2c_imx_stop(), i2c_imx_dma_read(), i2c_imx_read() and
>> i2c_imx_xfer().
>>
>> Signed-off-by: Esben Haabendal <eha@deif.com>
>> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
>
> Applied to for-next, thanks! I did not add stable because the cover
> latter said minor issue? Not really sure here, though...

I agree, it does not need to go into stable.

/Esben

\
 
 \ /
  Last update: 2018-08-20 11:21    [W:0.060 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site