lkml.org 
[lkml]   [2018]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] clk: vc5: Avoid divide by zero when rounding or setting rates
Date
Quoting Steve Longerbeam (2018-07-18 10:56:51)
>
>
> On 07/06/2018 11:23 AM, Stephen Boyd wrote:
> > Quoting Steve Longerbeam (2018-05-31 18:59:17)
> >> Add checks in the .round_rate and .set_rate ops for zero requested
> >> rate or zero parent rate. If either are zero in .round_rate, just
> >> return zero. If either are zero in .set_rate, return -EINVAL.
> > Are you seeing problems when the clk is unparented and we're trying to
> > recalculate the rate or change rates, and thus the parent frequency
> > looks like 0?
>
> The problem appeared when suspending the rcar-du driver.
> The kernel tested is a Renesas BSP release (3.6.2), and in the
> version of the rcar-du driver from that release, the driver calls
> clk_set_rate() with a rate of zero in its suspend PM op. This is
> fixed in mainline kernel. So the divide-by-zero in vc5 clock driver
> probably will not show up in mainline.

Ok so then this patch shouldn't be applied on mainline?

>
> > Should this get a Fixes: tag so that it goes back to
> > stable kernels?
> >
>
> Zero rates are not checked beginning with the initial commit
> 3e1aec4e2c ("clk: vc5: Add support for IDT VersaClock 5P49V5923 and
> 5P49V5933").
> so that would have to be the Fixes: tag.

Thanks!

\
 
 \ /
  Last update: 2018-08-02 22:53    [W:0.077 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site