lkml.org 
[lkml]   [2018]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 00/31] Introduced new Cadence USBSSP DRD Driver
Date
> > This patch set introduce new Cadence USBSSP DRD driver to linux
> > kernel.
> >
> > The Cadence USBSSP DRD Driver s a highly configurable IP Core which
> > can be instantiated as Dual-Role Device (DRD), Peripheral Only and
> > Host Only (XHCI) configurations.
> >
> > The current driver has been validated with FPGA burned. We have
> > support for PCIe bus, which is used on FPGA prototyping.
> >
> > The host site of USBSSP controller is compliance with XHCI
> > specification, so it works with standard XHCI linux driver.
> >
> > Also, device side of USBSSP controller was designed in such way to
> > looks like XHCI. It means that most of logic of USBSSP controller is
> > also compliance with XHCI specification.
> >
> > Consequently, the USBSSP driver for peripheral mode is very similar to
> > XHCI driver.
> >
> > This version of driver supports only Device mode but DRD and Host mode
> > will be added in the future.
> >
>
> Based on the posting date this series looks like v3.
>
> You should add the version prefix to the patches next time.
> e.g. [PATCH v4 ...]
>
I wanted to start versioning driver after this set patch will be approved.
Also I have plan to add change-log after approval this patch set.
I now treat this patch set as Initial version of driver.
If my approach is incorrect please correct me ??
Maybe before approval the better versioning will be [PATCH vrc4] ?

> It is also recommended to add a Change-log in the cover letter explaining
> what changes were made in each revision.
>
I

> There are a bunch of checkpatch warnings in this series.
> You can use ./scripts/checkpatch.pl on the patches and fix the issues.
Yes I know, but most of them are related to "line over 80 characters"
and " quoted string split across lines" warnings. The first group I could correct
but then I will make readability worse.
To eliminate the second group I will have to enlarge the first group of warnings and
the number of characters in single line will be bigger than 100.
> > ---
> >
> > Pawel Laszczak (31):
> > usb: usbssp: Defined register maps and other useful structures.
> > usb: usbssp: Added some decoding functions.
> > usb: usbssp: Add trace events used in driver
> > usb: usbssp: Added USBSSP platform driver
> > usb: usbssp: Added first part of initialization sequence.
> > usb: usbssp: added template functions used by upper layer.
> > usb: usbssp: Initialization - added usbssp_mem_init
> > usb: usbssp: Added ring and segment handling functions.
> > usb: usbssp: add implementation of usbssp_mem_cleanup
> > usb: usbssp: added usbssp_trb_in_td function.
> > usb: usbssp: added function for stopping driver.
> > usb: usbssp: added functions for queuing commands.
> > usb: usbssp: addec procedure for handlin Port Status Change events.
> > usb: usbssp: added procedure handling command completion events.
> > usb: usbssp: added device controller error, transfer and SETUP
> > completion event.
> > usb: usbssp: added connect/disconnect procedures.
> > usb: usbssp: added implementation of usbssp_halt_endpoint function.
> > usb: usbssp: added handling of Port Reset event.
> > usb: usbssp: added support for USB enumeration process.
> > usb: usbssp: added queuing procedure for control transfer.
> > usb: usbssp: added queuing procedure for BULK and INT transfer.
> > usb: usbssp: added procedure removing request from transfer ring
> > usb: usbssp: added implementation of transfer events.
> > usb: usbssp: added detecting command timeout.
> > usb: usbssp: added implementation of usbssp interface.
> > usb: usbssp: added endpoint configuration functionality.
> > usb: usbssp: implements usbssp_gadget_ep_enable function
> > usb: usbssp: implemented usbssp_gadget_ep_disable function.
> > usb: usbssp: added support for LPM.
> > usb: usbssp: added support for TEST_MODE.
> > usb: usbssp: add pci to platform driver wrapper.
> >
> > drivers/usb/Kconfig | 2 +
> > drivers/usb/Makefile | 2 +
> > drivers/usb/usbssp/Kconfig | 29 +
> > drivers/usb/usbssp/Makefile | 15 +
> > drivers/usb/usbssp/gadget-dbg.c | 39 +
> > drivers/usb/usbssp/gadget-ep0.c | 571 +++++
> > drivers/usb/usbssp/gadget-ext-caps.h | 102 +
> > drivers/usb/usbssp/gadget-if.c | 569 +++++
> > drivers/usb/usbssp/gadget-mem.c | 1938 +++++++++++++++
> > drivers/usb/usbssp/gadget-port.c | 287 +++
> > drivers/usb/usbssp/gadget-ring.c | 3452 ++++++++++++++++++++++++++
> > drivers/usb/usbssp/gadget-trace.c | 13 +
> > drivers/usb/usbssp/gadget-trace.h | 482 ++++
> > drivers/usb/usbssp/gadget.c | 1909 ++++++++++++++
> > drivers/usb/usbssp/gadget.h | 2373 ++++++++++++++++++
> > drivers/usb/usbssp/usbssp-pci-wrap.c | 226 ++
> > drivers/usb/usbssp/usbssp-plat.c | 186 ++
> > 17 files changed, 12195 insertions(+) create mode 100644
> > drivers/usb/usbssp/Kconfig create mode 100644
> > drivers/usb/usbssp/Makefile create mode 100644
> > drivers/usb/usbssp/gadget-dbg.c create mode 100644
> > drivers/usb/usbssp/gadget-ep0.c create mode 100644
> > drivers/usb/usbssp/gadget-ext-caps.h
> > create mode 100644 drivers/usb/usbssp/gadget-if.c create mode 100644
> > drivers/usb/usbssp/gadget-mem.c create mode 100644
> > drivers/usb/usbssp/gadget-port.c create mode 100644
> > drivers/usb/usbssp/gadget-ring.c create mode 100644
> > drivers/usb/usbssp/gadget-trace.c create mode 100644
> > drivers/usb/usbssp/gadget-trace.h create mode 100644
> > drivers/usb/usbssp/gadget.c create mode 100644
> > drivers/usb/usbssp/gadget.h create mode 100644
> > drivers/usb/usbssp/usbssp-pci-wrap.c
> > create mode 100644 drivers/usb/usbssp/usbssp-plat.c
> >
>
> --
cheers,
Pawel

\
 
 \ /
  Last update: 2018-08-02 06:31    [W:2.490 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site