lkml.org 
[lkml]   [2018]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] mtd: m25p80: Call spi_mem_get_name() to let controller set a custom name
Date
By calling spi_mem_get_name(), the driver of the (Q)SPI controller can
set a custom name for the memory device if necessary.
This is useful to keep mtdparts compatible when controller drivers are
ported from the MTD to the SPI layer.

Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@exceet.de>
---
drivers/mtd/devices/m25p80.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index e84563d..aac48800 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -202,6 +202,9 @@ static int m25p_probe(struct spi_mem *spimem)
if (data && data->name)
nor->mtd.name = data->name;

+ if (!nor->mtd.name)
+ nor->mtd.name = spi_mem_get_name(spimem);
+
/* For some (historical?) reason many platforms provide two different
* names in flash_platform_data: "name" and "type". Quite often name is
* set to "m25p80" and then "type" provides a real chip name.
--
2.7.4
\
 
 \ /
  Last update: 2018-08-02 14:55    [W:0.052 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site