lkml.org 
[lkml]   [2018]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 12/15] drm/mediatek: add layer number condition for RDMA to control plane
From
Date
Hi, CK:

On Wed, 2018-07-25 at 11:02 +0800, CK Hu wrote:
> Hi, Stu:
>
> On Tue, 2018-07-24 at 16:17 +0800, Stu Hsieh wrote:
> > This patch add layer number condition for RDMA to control plane
> >
> > When plane init in crtc create,
> > it use the number of OVL layer to init plane.
> > That's OVL can read 4 memory address.
> >
> > For mt2712 third ddp, it use RDMA to read memory.
> > RDMA can read 1 memory address, so it just init one plane.
> >
> > For compatibility, this patch use two define OVL_LAYER_NR and
> > RDMA_LAYER_NR to distingush two difference HW engine.
> >
> > Signed-off-by: Stu Hsieh <stu.hsieh@mediatek.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 25 +++++++++++++++++--------
> > drivers/gpu/drm/mediatek/mtk_drm_crtc.h | 2 ++
> > 2 files changed, 19 insertions(+), 8 deletions(-)
> >
>
> [...]
>
> > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > index 9d9410c67ae9..b44fefadf14a 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > @@ -18,7 +18,9 @@
> > #include "mtk_drm_ddp_comp.h"
> > #include "mtk_drm_plane.h"
> >
> > +#define MAX_LAYER_NR 4
> > #define OVL_LAYER_NR 4
> > +#define RDMA_LAYER_NR 1
> > #define MTK_LUT_SIZE 512
> > #define MTK_MAX_BPC 10
> > #define MTK_MIN_BPC 3
>
> If the layer number is not fixed in '4', I would like to get this value
> from component because in some SoC, OVL may have 6 layer. So add an
> interface to get the max layer number and OVL, RDMA driver would return
> the number for this SoC.
>
> Regards,
> CK
>
OK

Regards,
Stu

>


\
 
 \ /
  Last update: 2018-08-02 13:38    [W:0.121 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site