lkml.org 
[lkml]   [2018]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/6] irqchip: RISC-V Local Interrupt Controller Driver
On Thu, Aug 02, 2018 at 11:35:43AM +0200, Thomas Gleixner wrote:
> On Thu, 2 Aug 2018, Christoph Hellwig wrote:
> > The cpu local interrupt handling, which was irq-riscv-intc.c in this
> > series and has been moved to arch/riscv/kernel/irq.c in my new series
> > is split over a few control registers (CSRs in RISC-V speak):
> >
> > The exception handler, which includes the delivery of interrupts to
> > the CPU is set up using the stvec CSR (Section 4.1.4). The vector mode
> > mentioned there is not supported by Linux (and not by any hardware known
> > to me), so ignore it.
>
> And even if it would be available then it would just avoid the software
> decoding of the cause register. So no fundamental difference.
>
> > Once an exception has been triggered Linux reads the scause CSR
> > (Section 4.1.10) to check the exception cause. If the interrupt
> > bit is set we have three possible exception causes that matter for
> > the kernel: Supervisor software interrupt, Supervisor timer interrupt,
> > Supervisor external interrupt (ignore the user versions, I'm not even
> > sure they are implementable, and they certainly are not at the moment).
>
> Yeah. I would upfront declare the user stuff broken and not supported.
>
> > To enable / disable any of these logical interrupt sources the sie
> > CSR (Section 4.1.5) has a bit for each kind thast can be set/cleared.
> >
> > Also there is the sip CSR (also section 4.1.5) which tells if any of those
> > is pending at the moment.
>
> So that's the low level per cpu interrupt/exception distribution mechanism,
> i.e. a distinct per cpu 'vector' space with fixed functionality. It does
> not make sense to actually handle that as an irq chip. It has absolutely no
> relevance. The software interrupts are enabled when the CPU is started and
> the external ones as well as they are gated by the PLIC.
>
> The only thing which might need to access the enable register is the local
> timer interrupt. That really does not require an extra irq chip as the
> enable/disable is really just at cpu up/down time and the magic happens on
> the local CPU so no smp functional call hackery is required.
>
> The PLIC is the beast which wants a proper irqdomain/irqchip
> implementation.

And that is exactly what I've done in the repost.

Local interrupt handling:

http://git.infradead.org/users/hch/riscv.git/commitdiff/149ae0008effe80e1fb79444eb6a03c45bed29ba

PLIC driver:

http://git.infradead.org/users/hch/riscv.git/commitdiff/00f68341fa6dcda9b7c6c4da7eeb52d7ef933368

Clocksource:

http://git.infradead.org/users/hch/riscv.git/commitdiff/51981cbba2fe2a118bb84b4c4aabb0f0d988ed2a

I need to polish the DT binding a little more and will repost later today.

>
> Thanks,
>
> tglx
---end quoted text---

\
 
 \ /
  Last update: 2018-08-02 11:39    [W:2.467 / U:0.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site