lkml.org 
[lkml]   [2018]   [Aug]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] drm: omapdrm: displays: fix port_num for opa362 output
Date
Hi Nikolaus,

Thank you for the patch.

On Friday, 27 July 2018 17:24:32 EEST H. Nikolaus Schaller wrote:
> The opa362 amplifier has two ports, an input (usually connected
> to the OMAP3 VENC) and an output port connected to the external
> connector.
>
> These are usually defined as input port@0 and outpt port@1 in
> the DT and really distinguished by the reg = <port_num> property
> of these nodes.
>
> But we are missing to define the output port as number 1 so
> it does not match the DT entry.
>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>

I think this patch is superseded by "[PATCH v3 36/61] drm/omap: dss: Replace
omap_dss_device port number with bitmask" which should get merged in v4.20.

> ---
> drivers/gpu/drm/omapdrm/displays/encoder-opa362.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
> b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c index
> afee1b8b457a..296d46f060b2 100644
> --- a/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
> +++ b/drivers/gpu/drm/omapdrm/displays/encoder-opa362.c
> @@ -208,6 +208,7 @@ static int opa362_probe(struct platform_device *pdev)
> dssdev->type = OMAP_DISPLAY_TYPE_VENC;
> dssdev->output_type = OMAP_DISPLAY_TYPE_VENC;
> dssdev->owner = THIS_MODULE;
> + dssdev->port_num = 1; /* second port */
>
> r = omapdss_register_output(dssdev);
> if (r) {

--
Regards,

Laurent Pinchart



\
 
 \ /
  Last update: 2018-08-19 16:07    [W:0.051 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site