lkml.org 
[lkml]   [2018]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/9] iio: tsl2772: add support for reading proximity led settings from device tree
On Thu,  2 Aug 2018 20:18:54 -0400
Brian Masney <masneyb@onstation.org> wrote:

> This patch adds support for optionally reading the proximity led diode
> and current settings from device tree. This was tested using a LG
> Nexus 5 (hammerhead) which requires a different diode than the driver
> default for the IR LED.
>
> Signed-off-by: Brian Masney <masneyb@onstation.org>

Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with them.

thanks,

Jonathan

> ---
> drivers/iio/light/tsl2772.c | 81 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 81 insertions(+)
>
> diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
> index df5b2a0da96c..ae00edf0d87e 100644
> --- a/drivers/iio/light/tsl2772.c
> +++ b/drivers/iio/light/tsl2772.c
> @@ -107,6 +107,8 @@
> #define TSL2772_ALS_GAIN_TRIM_MIN 250
> #define TSL2772_ALS_GAIN_TRIM_MAX 4000
>
> +#define TSL2772_MAX_PROX_LEDS 2
> +
> /* Device family members */
> enum {
> tsl2571,
> @@ -141,6 +143,14 @@ struct tsl2772_chip_info {
> const struct iio_info *info;
> };
>
> +static const int tsl2772_led_currents[][2] = {
> + { 100000, TSL2772_100_mA },
> + { 50000, TSL2772_50_mA },
> + { 25000, TSL2772_25_mA },
> + { 13000, TSL2772_13_mA },
> + { 0, 0 }
> +};
> +
> struct tsl2772_chip {
> kernel_ulong_t id;
> struct mutex prox_mutex;
> @@ -515,6 +525,75 @@ static int tsl2772_get_prox(struct iio_dev *indio_dev)
> return ret;
> }
>
> +static int tsl2772_read_prox_led_current(struct tsl2772_chip *chip)
> +{
> + struct device_node *of_node = chip->client->dev.of_node;
> + int ret, tmp, i;
> +
> + ret = of_property_read_u32(of_node, "led-max-microamp", &tmp);
> + if (ret < 0)
> + return ret;
> +
> + for (i = 0; tsl2772_led_currents[i][0] != 0; i++) {
> + if (tmp == tsl2772_led_currents[i][0]) {
> + chip->settings.prox_power = tsl2772_led_currents[i][1];
> + return 0;
> + }
> + }
> +
> + dev_err(&chip->client->dev, "Invalid value %d for led-max-microamp\n",
> + tmp);
> +
> + return -EINVAL;
> +
> +}
> +
> +static int tsl2772_read_prox_diodes(struct tsl2772_chip *chip)
> +{
> + struct device_node *of_node = chip->client->dev.of_node;
> + int i, ret, num_leds, prox_diode_mask;
> + u32 leds[TSL2772_MAX_PROX_LEDS];
> +
> + ret = of_property_count_u32_elems(of_node, "amstaos,proximity-diodes");
> + if (ret < 0)
> + return ret;
> +
> + num_leds = ret;
> + if (num_leds > TSL2772_MAX_PROX_LEDS)
> + num_leds = TSL2772_MAX_PROX_LEDS;
> +
> + ret = of_property_read_u32_array(of_node, "amstaos,proximity-diodes",
> + leds, num_leds);
> + if (ret < 0) {
> + dev_err(&chip->client->dev,
> + "Invalid value for amstaos,proximity-diodes: %d.\n",
> + ret);
> + return ret;
> + }
> +
> + prox_diode_mask = 0;
> + for (i = 0; i < num_leds; i++) {
> + if (leds[i] == 0)
> + prox_diode_mask |= TSL2772_DIODE0;
> + else if (leds[i] == 1)
> + prox_diode_mask |= TSL2772_DIODE1;
> + else {
> + dev_err(&chip->client->dev,
> + "Invalid value %d in amstaos,proximity-diodes.\n",
> + leds[i]);
> + return -EINVAL;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static void tsl2772_parse_dt(struct tsl2772_chip *chip)
> +{
> + tsl2772_read_prox_led_current(chip);
> + tsl2772_read_prox_diodes(chip);
> +}
> +
> /**
> * tsl2772_defaults() - Populates the device nominal operating parameters
> * with those provided by a 'platform' data struct or
> @@ -541,6 +620,8 @@ static void tsl2772_defaults(struct tsl2772_chip *chip)
> memcpy(chip->tsl2772_device_lux,
> tsl2772_default_lux_table_group[chip->id],
> TSL2772_DEFAULT_TABLE_BYTES);
> +
> + tsl2772_parse_dt(chip);
> }
>
> /**

\
 
 \ /
  Last update: 2018-08-18 19:05    [W:0.431 / U:0.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site