lkml.org 
[lkml]   [2018]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 7/7] Documentation: devicetree: Add Xilinx R5 rproc binding
Date
Add device tree binding for Xilinx Cortex-r5 remoteproc.

Signed-off-by: Wendy Liang <jliang@xilinx.com>
---
.../remoteproc/xlnx,zynqmp-r5-remoteproc.txt | 81 ++++++++++++++++++++++
1 file changed, 81 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5-remoteproc.txt

diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5-remoteproc.txt b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5-remoteproc.txt
new file mode 100644
index 0000000..3940019
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5-remoteproc.txt
@@ -0,0 +1,81 @@
+Xilinx ARM Cortex A53-R5 remoteproc driver
+==========================================
+
+ZynqMP family of devices use two Cortex R5 processors to help with various
+low power / real time tasks.
+
+This driver requires specific ZynqMP hardware design.
+
+ZynqMP R5 RemoteProc Device Node:
+=================================
+A zynqmp_r5_remoteproc device node is used to represent a R5 IP instance
+within ZynqMP SoC.
+
+Required properties:
+--------------------
+ - compatible : Should be "xlnx,zynqmp-r5-remoteproc-1.0"
+ - reg : Address and length of the register set for the device. It
+ contains in the same order as described reg-names
+ - reg-names: Contain the register set names.
+ "tcm_a" and "tcm_b" for TCM memories.
+ If the user uses the remoteproc driver with the RPMsg kernel
+ driver,"ipi" for the IPI register used to communicate with RPU
+ is also required.
+ Otherwise, if user only uses the remoteproc driver to boot RPU
+ firmware, "ipi" is not required.
+ - tcm-pnode-id: TCM resources power nodes IDs which are used to request TCM
+ resources for the remoteproc driver to access.
+ - rpu-pnode-id : RPU power node id which is used by the remoteproc driver
+ to start RPU or shut it down.
+
+Optional properties:
+--------------------
+ - core_conf : R5 core configuration (valid string - split0 or split1 or
+ lock-step), default is lock-step.
+ - memory-region: memories regions for RPU executable and DMA memory.
+ - interrupts : Interrupt mapping for remoteproc IPI. It is required if the
+ user uses the remoteproc driver with the RPMsg kernel driver.
+ - interrupt-parent : Phandle for the interrupt controller. It is required if
+ the user uses the remoteproc driver with the RPMsg kernel
+ kernel driver.
+
+Example:
+--------
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ rproc_0_fw_reserved: rproc@3ed000000 {
+ compatible = "rproc-prog-memory";
+ no-map;
+ reg = <0x0 0x3ed00000 0x0 0x40000>;
+ };
+ rproc_0_dma_reserved: rproc@3ed400000 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x0 0x3ed40000 0x0 0x80000>;
+ };
+ };
+
+ firmware {
+ zynqmp_firmware: zynqmp-firmware {
+ compatible = "xlnx,zynqmp-firmware";
+ method = "smc";
+ };
+ };
+
+ zynqmp-r5-remoteproc@0 {
+ compatible = "xlnx,zynqmp-r5-remoteproc-1.0";
+ reg = <0x0 0xFFE00000 0x0 0x10000>,
+ <0x0 0xFFE20000 0x0 0x10000>,
+ <0x0 0xff340000 0x0 0x100>;
+ reg-names = "tcm_a", "tcm_b", "ipi";
+ dma-ranges;
+ core_conf = "split0";
+ memory-region = <&rproc_0_fw_reserved>,
+ <&rproc_0_dma_reserved>;
+ tcm-pnode-id = <0xf>, <0x10>;
+ rpu-pnode-id = <0x7>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 29 4>;
+ } ;
--
2.7.4
\
 
 \ /
  Last update: 2018-08-16 09:08    [W:0.250 / U:0.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site