lkml.org 
[lkml]   [2018]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] powerpc/pseries/mm: call H_BLOCK_REMOVE
From
Date
On 30/07/2018 16:22, Aneesh Kumar K.V wrote:
> Michael Ellerman <mpe@ellerman.id.au> writes:
>
>> Hi Laurent,
>>
>> Just one comment below.
>>
>> Laurent Dufour <ldufour@linux.vnet.ibm.com> writes:
>>> diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
>>> index 96b8cd8a802d..41ed03245eb4 100644
>>> --- a/arch/powerpc/platforms/pseries/lpar.c
>>> +++ b/arch/powerpc/platforms/pseries/lpar.c
>>> @@ -418,6 +418,73 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long vpn,
>>> BUG_ON(lpar_rc != H_SUCCESS);
>>> }
>>>
>>> +
>>> +/*
>>> + * As defined in the PAPR's section 14.5.4.1.8
>>> + * The control mask doesn't include the returned reference and change bit from
>>> + * the processed PTE.
>>> + */
>>> +#define HBLKR_AVPN 0x0100000000000000UL
>>> +#define HBLKR_CTRL_MASK 0xf800000000000000UL
>>> +#define HBLKR_CTRL_SUCCESS 0x8000000000000000UL
>>> +#define HBLKR_CTRL_ERRNOTFOUND 0x8800000000000000UL
>>> +#define HBLKR_CTRL_ERRBUSY 0xa000000000000000UL
>>> +
>>> +/**
>>> + * H_BLOCK_REMOVE caller.
>>> + * @idx should point to the latest @param entry set with a PTEX.
>>> + * If PTE cannot be processed because another CPUs has already locked that
>>> + * group, those entries are put back in @param starting at index 1.
>>> + * If entries has to be retried and @retry_busy is set to true, these entries
>>> + * are retried until success. If @retry_busy is set to false, the returned
>>> + * is the number of entries yet to process.
>>> + */
>>> +static unsigned long call_block_remove(unsigned long idx, unsigned long *param,
>>> + bool retry_busy)
>>> +{
>>> + unsigned long i, rc, new_idx;
>>> + unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
>>> +
>>> +again:
>>> + new_idx = 0;
>>> + BUG_ON((idx < 2) || (idx > PLPAR_HCALL9_BUFSIZE));
>>
>> I count 1 ..
>>
>>> + if (idx < PLPAR_HCALL9_BUFSIZE)
>>> + param[idx] = HBR_END;
>>> +
>>> + rc = plpar_hcall9(H_BLOCK_REMOVE, retbuf,
>>> + param[0], /* AVA */
>>> + param[1], param[2], param[3], param[4], /* TS0-7 */
>>> + param[5], param[6], param[7], param[8]);
>>> + if (rc == H_SUCCESS)
>>> + return 0;
>>> +
>>> + BUG_ON(rc != H_PARTIAL);
>>
>> 2 ...
>>
>>> + /* Check that the unprocessed entries were 'not found' or 'busy' */
>>> + for (i = 0; i < idx-1; i++) {
>>> + unsigned long ctrl = retbuf[i] & HBLKR_CTRL_MASK;
>>> +
>>> + if (ctrl == HBLKR_CTRL_ERRBUSY) {
>>> + param[++new_idx] = param[i+1];
>>> + continue;
>>> + }
>>> +
>>> + BUG_ON(ctrl != HBLKR_CTRL_SUCCESS
>>> + && ctrl != HBLKR_CTRL_ERRNOTFOUND);
>>
>> 3 ...
>>
>> BUG_ON()s.
>>
>> I know the code in this file is already pretty liberal with the use of
>> BUG_ON() but I'd prefer if we don't make it any worse.
>>
>> Given this is an optimisation it seems like we should be able to fall
>> back to the existing implementation in the case of error (which will
>> probably then BUG_ON() 😂)
>>
>> If there's some reason we can't then I guess I can live with it.
>
> It would be nice to log the error in case we are not expecting the
> error return. We recently did
> https://marc.info/?i=20180629083904.29250-1-aneesh.kumar@linux.ibm.com

I'm not sure that a failure during an invalidation should just result in an
error message being displayed because the page remains accessible and could
potentially be accessed later.
A comment in the caller hash__tlb_flush(), is quite explicit about that:
/* If there's a TLB batch pending, then we must flush it because the
* pages are going to be freed and we really don't want to have a CPU
* access a freed page because it has a stale TLB
*/

Getting an error when adding an entry may not be fatal but when removing one,
this could lead to data being exposed.

Laurent.

\
 
 \ /
  Last update: 2018-08-16 19:28    [W:1.461 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site