lkml.org 
[lkml]   [2018]   [Aug]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V5 00/10] mmc: add support for sdhci 4.0
Date
From the SD host controller version 4.0 on, SDHCI implementation either
is version 3 compatible or version 4 mode. This patch-set covers those
changes which are common for SDHCI 4.0 version, regardless of whether
they are used with SD or eMMC storage devices.

This patchset also added a new sdhci driver for Spreadtrum's controller
which supports v4.0 mode.

This patchset has been tested on Spreadtrum's mobile phone, emmc can be
initialized, mounted, read and written, with these changes for common
sdhci framework and sdhci-sprd driver.

Changes from V4:
* Addressed Adrian's comments:
- Enable v4 mode in __sdhci_read_caps() and sdhci_init() instead of sdhci_do_reset();
- Move the added member 'v4_mode' to following with other bools;
- Add more comments in the added function sdhci_config_dma();
- Instead of enabling auto-CMD23 in init, enabled it only if receiving sbc from
cards and the argument is suitable for host to deal with;
- Make the addition of the SDHCI_SPEC_4xx defines a separate patch;
- Disable auto-CMD23 if stuff bits is set in the argument of CMD23 in sdhci_request().

* For V4 mode, SDMA also can use auto-CMD23, adjusted host->flags in sdhci_setup_host().

Previous patch series:
v4: https://lkml.org/lkml/2018/7/23/269
v3: https://lkml.org/lkml/2018/7/8/239
v2: https://lkml.org/lkml/2018/6/14/936
v1: https://lkml.org/lkml/2018/6/8/108

Chunyan Zhang (10):
mmc: sdhci: Add version V4 definition
mmc: sdhci: Add sd host v4 mode
mmc: sdhci: Change SDMA address register for v4 mode
mmc: sdhci: Add ADMA2 64-bit addressing support for V4 mode
mmc: sdhci: Add 32-bit block count support for v4 mode
mmc: sdhci: Disable auto-CMD23 if stuff bits is set in CMD23 argument
mmc: sdhci: Add Auto CMD Auto Select support
mmc: sdhci: SDMA may use Auto-CMD23 in v4 mode
mmc: sdhci-sprd: Add Spreadtrum's initial host controller
dt-bindings: sdhci-sprd: Add bindings for the sdhci-sprd controller

.../devicetree/bindings/mmc/sdhci-sprd.txt | 41 ++
drivers/mmc/host/Kconfig | 13 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-sprd.c | 464 +++++++++++++++++++++
drivers/mmc/host/sdhci.c | 251 ++++++++---
drivers/mmc/host/sdhci.h | 22 +-
6 files changed, 741 insertions(+), 51 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-sprd.txt
create mode 100644 drivers/mmc/host/sdhci-sprd.c

--
2.7.4

\
 
 \ /
  Last update: 2018-08-16 09:55    [W:0.181 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site