lkml.org 
[lkml]   [2018]   [Aug]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 8/8] docs: fpga: document programming fpgas using regions
On Tue, Aug 14, 2018 at 9:40 PM, Randy Dunlap <rdunlap@infradead.org> wrote:

Hi Randy,

> On 08/14/2018 12:15 PM, Alan Tull wrote:
>> Clarify the intention that interfaces and upper layers use
>> regions rather than managers directly.
>>
>> Rearrange API documentation to better group the API functions
>> used to create FPGA mgr/bridge/regions and the API used for
>> programming FPGAs.
>>
>> Signed-off-by: Alan Tull <atull@kernel.org>
>> ---
>> Documentation/driver-api/fpga/fpga-bridge.rst | 38 ++-----
>> Documentation/driver-api/fpga/fpga-mgr.rst | 117 ++-------------------
>> Documentation/driver-api/fpga/fpga-programming.rst | 103 ++++++++++++++++++
>> Documentation/driver-api/fpga/fpga-region.rst | 92 ++++++++--------
>> Documentation/driver-api/fpga/index.rst | 2 +
>> 5 files changed, 166 insertions(+), 186 deletions(-)
>> create mode 100644 Documentation/driver-api/fpga/fpga-programming.rst
>>
>
> Hi,
> A few comments below...
>
>
>> diff --git a/Documentation/driver-api/fpga/fpga-programming.rst b/Documentation/driver-api/fpga/fpga-programming.rst
>> new file mode 100644
>> index 0000000..cc34d17
>> --- /dev/null
>> +++ b/Documentation/driver-api/fpga/fpga-programming.rst
>> @@ -0,0 +1,103 @@
>> +In-kernel API for FPGA Programming
>> +==================================
>> +
>> +Overview
>> +--------
>> +
>> +The in-kernel API for FPGA programming is a combination of APIs from
>> +FPGA manager, bridge, and regions. The actual function used to
>> +trigger FPGA programming is :c:func:`fpga_region_program_fpga()`.
>> +
>> +:c:func:`fpga_region_program_fpga()` uses functionality supplied by
>> +the FPGA manager and bridges. It will:
>> +
>> + * lock the region's mutex
>> + * lock the mutex of the region's FPGA manager
>> + * build a list of FPGA bridges if a method has been specified to do so
>> + * disable the bridges
>> + * program the FPGA using info passed in :c:member:`fpga_region->info`.
>> + * re-enable the bridges
>> + * release the locks
>> +
>> +The struct fpga_image_info specifies what FPGA image to program. It is allocated/freed by :c:func:`fpga_image_info_alloc()` and freed with :c:func:`fpga_image_info_free()`
>> +
>> +How to program an FPGA using a region
>> +-------------------------------------
>> +
>> +When the FPGA region driver probed, it was given a pointer to a FPGA manager
>
> to an FPGA

Yes

>
>> +driver so it knows which manager to use. The region also either has a list of
>> +bridges to control during programming or it has a pointer to a function that
>> +will generate that list. Here's some sample code of what to do next::
>> +
>> + #include <linux/fpga/fpga-mgr.h>
>> + #include <linux/fpga/fpga-region.h>
>> +
>> + struct fpga_image_info *info;
>> + int ret;
>> +
>> + /*
>> + * First, alloc the struct with information about the FPGA image to
>> + * program.
>> + */
>> + info = fpga_image_info_alloc(dev);
>> + if (!info)
>> + return -ENOMEM;
>> +
>> + /* Set flags as needed, such as: */
>> + info->flags = FPGA_MGR_PARTIAL_RECONFIG;
>> +
>> + /*
>> + * Indicate where the FPGA image is. This is pseudo-code; you're
>> + * going to use one of these three.
>> + */
>> + if (image is in a scatter gather table) {
>> +
>> + info->sgt = [your scatter gather table]
>> +
>> + } else if (image is in a buffer) {
>> +
>> + info->buf = [your image buffer]
>> + info->count = [image buffer size]
>> +
>> + } else if (image is in a firmware file) {
>> +
>> + info->firmware_name = devm_kstrdup(dev, firmware_name,
>> + GFP_KERNEL);
>> +
>> + }
>> +
>> + /* Add info to region and do the programming */
>> + region->info = info;
>> + ret = fpga_region_program_fpga(region);
>> + if (ret)
>> + return ret;
>> +
>
> always deallocate and then do:
> if (ret)
> return ret;
> ?

Yep, I'll fix it.

>
>> + /* Deallocate the image info if you're done with it */
>> + fpga_image_info_free(info);
>> +
>> + /* Now enumerate whatever hardware has appeared in the FPGA. */
>> +
>> +API for programming an FPGA
>> +---------------------------
>> +
>> +* :c:func:`fpga_region_program_fpga` — Program a FPGA
>> +* :c:type:`fpga_image_info` — Specifies what FPGA image to program
>> +* :c:func:`fpga_image_info_alloc()` — Allocate a FPGA image info struct
>> +* :c:func:`fpga_image_info_free()` — Free a FPGA image info struct
>> +
>> +.. kernel-doc:: drivers/fpga/fpga-region.c
>> + :functions: fpga_region_program_fpga
>> +
>> +FPGA Manager flags
>> +
>> +.. kernel-doc:: include/linux/fpga/fpga-mgr.h
>> + :doc: FPGA Manager flags
>> +
>> +.. kernel-doc:: include/linux/fpga/fpga-mgr.h
>> + :functions: fpga_image_info
>> +
>> +.. kernel-doc:: drivers/fpga/fpga-mgr.c
>> + :functions: fpga_image_info_alloc
>> +
>> +.. kernel-doc:: drivers/fpga/fpga-mgr.c
>> + :functions: fpga_image_info_free
>
> [snip]
>
>> API to add a new FPGA region
>> ----------------------------
>>
>> +* struct :c:type:`fpga_region` — The FPGA region struct
>> +* :c:func:`devm_fpga_region_create` — Allocate and init a region struct
>> +* :c:func:`fpga_region_register` — Register a FPGA region
>
> an FPGA
>
>> +* :c:func:`fpga_region_unregister` — Unregister a FPGA region
>
> an FPGA
>
>> +
>> +The FPGA region's probe function will need to get a reference to the FPGA
>> +Manager it will be using to do the programming. This usually would happen
>> +during the region's probe function.
>> +
>> +* :c:func:`fpga_mgr_get` — Get a reference to a FPGA manager, raise ref count
>
> an FPGA
>
>> +* :c:func:`of_fpga_mgr_get` — Get a reference to a FPGA manager, raise ref count,
>
> an FPGA
>
>> + given a device node.
>> +* :c:func:`fpga_mgr_put` — Put a FPGA manager
>
> an FPGA

I'll fix these too; I'll go through this folder and s/a FPGA/an FPGA/g

>
>> +
>> +The FPGA region will need to specify which bridges to control while programming
>> +the FPGA. The region driver can build a list of bridges during probe time
>> +(:c:member:`fpga_region->bridge_list`) or it can have a function that creates
>> +the list of bridges to program just before programming
>> +(:c:member:`fpga_region->get_bridges`). The FPGA bridge framework supplies the
>> +following APIs to handle building or tearing down that list.
>> +
>> +* :c:func:`fpga_bridge_get_to_list` — Get a ref of a FPGA bridge, add it to a
>> + list
>> +* :c:func:`of_fpga_bridge_get_to_list` — Get a ref of a FPGA bridge, add it to a
>> + list, given a device node
>> +* :c:func:`fpga_bridges_put` — Given a list of bridges, put them
>> +
>> .. kernel-doc:: include/linux/fpga/fpga-region.h
>> :functions: fpga_region
>>
>
>
>
> --
> ~Randy

Thanks for the review!

Alan

\
 
 \ /
  Last update: 2018-08-15 18:33    [W:3.039 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site