lkml.org 
[lkml]   [2018]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: imx6: Add stdout-path to Wandboard
Date
Setting a stdout-path in the .dtb is convenient because then the user
gets a serial console on the RS-232 connector without any extra effort
of figuring out the relevant 'console=' boot parameter.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
---
Tested on a Wandboard Quad with mainline U-Boot 2018.05.
---
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index e1afa54404d0..0ef34c31f7c6 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -8,6 +8,10 @@
#include <dt-bindings/gpio/gpio.h>

/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
--
2.16.3
\
 
 \ /
  Last update: 2018-08-14 22:49    [W:0.042 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site