lkml.org 
[lkml]   [2018]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 1/2] dt-bindings: ufs: Add bindings for Cadence UFS
Date


> On 13 Aug 2018, at 19:37, Rob Herring <robh@kernel.org> wrote:
>

>
> On Thu, Aug 09, 2018 at 01:25:15PM +0000, Janek Kotas wrote:
>> This patch adds a DT binding documentation for
>> Cadence UFS Host Controller.
>>
>> Signed-off-by: Jan Kotas <jank@cadence.com>
>> ---
>> .../devicetree/bindings/ufs/cdns,ufshc.txt | 31 ++++++++++++++++++++++
>> 1 file changed, 31 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
>> new file mode 100644
>> index 00000000..a04a4989
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
>> @@ -0,0 +1,31 @@
>> +* Cadence Universal Flash Storage (UFS) Controller
>> +
>> +UFS nodes are defined to describe on-chip UFS host controllers.
>> +Each UFS controller instance should have its own node.
>> +Please see the ufshcd-pltfrm.txt for a list of all available properties.
>> +
>> +Required properties:
>> +- compatible : Compatible list, contains the following controller:
>> + "cdns,ufshc"
>> + complemented with the JEDEC version:
>> + "jedec,ufs-2.0"
>> +
>> +- reg : Address and length of the UFS register set.
>> +- interrupts : One interrupt mapping.
>> +- freq-table-hz : Clock frequency table.
>> + See the ufshcd-pltfrm.txt for details.
>> +- clocks : List of phandle and clock specifier pairs.
>> +- clock-names : List of clock input name strings sorted in the same
>> + order as the clocks property. "core_clk" is mandatory.
>> + Depending on a type of a PHY,
>> + the "phy_clk" clock can also be added, if needed.
>
> Unfortunately, you went the wrong direction. The '_clk' part is
> redundant. Just ‘core’ and 'phy'.

I understand, however the rest of the ufs framework uses the '_clk' suffix:
drivers/scsi/ufs/ufshcd.c:6999:

if (!IS_ERR_OR_NULL(clki->clk)) {
if (skip_ref_clk && !strcmp(clki->name, "ref_clk"))
continue;

I wanted it to be consistent, with the rest of the UFS drivers.

Regards,
Jan

> With that,
>
> Reviewed-by: Rob Herring <robh@kernel.org>
>
>> +
>> +Example:
>> + ufs@fd030000 {
>> + compatible = "cdns,ufshc", "jedec,ufs-2.0";
>> + reg = <0xfd030000 0x10000>;
>> + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
>> + freq-table-hz = <0 0>, <0 0>;
>> + clocks = <&ufs_core_clk>, <&ufs_phy_clk>;
>> + clock-names = "core_clk", "phy_clk";
>> + };
>> --
>> 2.15.0
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at https://urldefense.proofpoint.com/v2/url?u=http-3A__vger.kernel.org_majordomo-2Dinfo.html&d=DwIBAg&c=aUq983L2pue2FqKFoP6PGHMJQyoJ7kl3s3GZ-_haXqY&r=g7GAQENVXx_RQdyXHInPMg&m=ecjmy2Uvl3hBpMuUQYFm4HSFwpZONkT2Qr8r--7g1w8&s=DbQRv1oGlru0wmHZJhFXzp7ywkGV895PPP_LAy-WBkM&e=

\
 
 \ /
  Last update: 2018-08-14 09:22    [W:0.080 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site