lkml.org 
[lkml]   [2018]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 018/104] phy: phy-mtk-tphy: use auto instead of force to bypass utmi signals
Date
4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chunfeng Yun <chunfeng.yun@mediatek.com>

commit 00c0092c5f62147b7d85f0c6f1cf245a0a1ff3b6 upstream.

When system is running, if usb2 phy is forced to bypass utmi signals,
all PLL will be turned off, and it can't detect device connection
anymore, so replace force mode with auto mode which can bypass utmi
signals automatically if no device attached for normal flow.
But keep the force mode to fix RX sensitivity degradation issue.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/phy/mediatek/phy-mtk-tphy.c | 19 +++++++------------
1 file changed, 7 insertions(+), 12 deletions(-)

--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -438,9 +438,9 @@ static void u2_phy_instance_init(struct
u32 index = instance->index;
u32 tmp;

- /* switch to USB function. (system register, force ip into usb mode) */
+ /* switch to USB function, and enable usb pll */
tmp = readl(com + U3P_U2PHYDTM0);
- tmp &= ~P2C_FORCE_UART_EN;
+ tmp &= ~(P2C_FORCE_UART_EN | P2C_FORCE_SUSPENDM);
tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0);
writel(tmp, com + U3P_U2PHYDTM0);

@@ -500,10 +500,8 @@ static void u2_phy_instance_power_on(str
u32 index = instance->index;
u32 tmp;

- /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */
tmp = readl(com + U3P_U2PHYDTM0);
- tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL);
- tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
+ tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
writel(tmp, com + U3P_U2PHYDTM0);

/* OTG Enable */
@@ -538,7 +536,6 @@ static void u2_phy_instance_power_off(st

tmp = readl(com + U3P_U2PHYDTM0);
tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN);
- tmp |= P2C_FORCE_SUSPENDM;
writel(tmp, com + U3P_U2PHYDTM0);

/* OTG Disable */
@@ -546,18 +543,16 @@ static void u2_phy_instance_power_off(st
tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN;
writel(tmp, com + U3P_USBPHYACR6);

- /* let suspendm=0, set utmi into analog power down */
- tmp = readl(com + U3P_U2PHYDTM0);
- tmp &= ~P2C_RG_SUSPENDM;
- writel(tmp, com + U3P_U2PHYDTM0);
- udelay(1);
-
tmp = readl(com + U3P_U2PHYDTM1);
tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID);
tmp |= P2C_RG_SESSEND;
writel(tmp, com + U3P_U2PHYDTM1);

if (tphy->pdata->avoid_rx_sen_degradation && index) {
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp &= ~(P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM);
+ writel(tmp, com + U3P_U2PHYDTM0);
+
tmp = readl(com + U3D_U2PHYDCR0);
tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
writel(tmp, com + U3D_U2PHYDCR0);

\
 
 \ /
  Last update: 2018-08-14 20:05    [W:0.599 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site