lkml.org 
[lkml]   [2018]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] drm/bridge/synopsys: dw-hdmi: re-run dw_hdmi_setup when setting mode
From
Date
在 2018-08-13一的 13:49 +0200,Andrzej Hajda写道:
> On 25.07.2018 05:56, Icenowy Zheng wrote:
> > Currently dw_hdmi_setup is only run when the dw-hdmi bridge is
> > enabled,
> > with the mode set last time.
> >
> > When the bridge is enabled before any mode is set (this may happen
> > when
> > booting), the mode won't be set at all, some setup steps will be
> > skipped or fail, and the HDMI output may not work.
>
> I guess, it should not happen. Could you show the stack-trace.

Mysteriously dw_hdmi_setup isn't called at all currently when booting
in thie situation. I added dump_stack() at the head of the function,
and it's only triggered when I re-plug the monitor.

In this case I got:
```
[ 46.891513] CPU: 0 PID: 73 Comm: irq/34-1ee0000. Not tainted 4.18.0+
#152
[ 46.898290] Hardware name: Allwinner sun8i Family
[ 46.903008] [<c010efac>] (unwind_backtrace) from [<c010bfd0>]
(show_stack+0x10/0x14)
[ 46.910746] [<c010bfd0>] (show_stack) from [<c06f59c4>]
(dump_stack+0x88/0x9c)
[ 46.917966] [<c06f59c4>] (dump_stack) from [<c04444d8>]
(dw_hdmi_update_power+0xb8/0x12cc)
[ 46.926225] [<c04444d8>] (dw_hdmi_update_power) from [<c044593c>]
(dw_hdmi_bridge_enable+0x2c/0x70)
[ 46.935262] [<c044593c>] (dw_hdmi_bridge_enable) from [<c04261f0>]
(drm_bridge_enable+0x24/0x34)
[ 46.944040] [<c04261f0>] (drm_bridge_enable) from [<c0404fd0>]
(drm_atomic_helper_commit_modeset_enables+0x9c/0x180)
[ 46.954552] [<c0404fd0>] (drm_atomic_helper_commit_modeset_enables)
from [<c040879c>] (drm_atomic_helper_commit_tail_rpm+0x24/0x64)
[ 46.966361] [<c040879c>] (drm_atomic_helper_commit_tail_rpm) from
[<c040861c>] (commit_tail+0x40/0x6c)
[ 46.975657] [<c040861c>] (commit_tail) from [<c040870c>]
(drm_atomic_helper_commit+0xbc/0x128)
[ 46.984259] [<c040870c>] (drm_atomic_helper_commit) from
[<c040ac70>] (restore_fbdev_mode_atomic+0x1cc/0x220)
[ 46.994164] [<c040ac70>] (restore_fbdev_mode_atomic) from
[<c040df90>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0xa0)
[ 47.005369] [<c040df90>] (drm_fb_helper_restore_fbdev_mode_unlocked)
from [<c040e00c>] (drm_fb_helper_set_par+0x30/0x54)
[ 47.016226] [<c040e00c>] (drm_fb_helper_set_par) from [<c040df08>]
(drm_fb_helper_hotplug_event.part.11+0xa0/0xa8)
[ 47.026563] [<c040df08>] (drm_fb_helper_hotplug_event.part.11) from
[<c03fee0c>] (drm_helper_hpd_irq_event+0x110/0x118)
[ 47.037334] [<c03fee0c>] (drm_helper_hpd_irq_event) from
[<c0445888>] (dw_hdmi_irq+0x10c/0x194)
[ 47.046025] [<c0445888>] (dw_hdmi_irq) from [<c01626a8>]
(irq_thread_fn+0x1c/0x54)
[ 47.053589] [<c01626a8>] (irq_thread_fn) from [<c01629c4>]
(irq_thread+0x158/0x21c)
[ 47.061241] [<c01629c4>] (irq_thread) from [<c013a324>]
(kthread+0x148/0x150)
[ 47.068373] [<c013a324>] (kthread) from [<c01010e8>]
(ret_from_fork+0x14/0x2c)
[ 47.075584] Exception stack(0xee8bbfb0 to 0xee8bbff8)
[ 47.080630] bfa0: 00000000
00000000 00000000 00000000
[ 47.088797] bfc0: 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000
[ 47.096964] bfe0: 00000000 00000000 00000000 00000000 00000013
00000000
```

>
> >
> > Re-run dw_hdmi_setup when setting mode, in order to prevent such
> > situation.
>
> mode_set is run with hardware disabled, thus usually it should not
> touch
> hardware.

However I think there's many instances now where some hardware setup is
performed in mode_set.

>
>
> >
> > Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> > ---
> > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > index 5971976284bf..e2f832182afe 100644
> > --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> > @@ -2007,6 +2007,7 @@ static void dw_hdmi_bridge_mode_set(struct
> > drm_bridge *bridge,
> >
> > /* Store the display mode for plugin/DKMS poweron events */
> > memcpy(&hdmi->previous_mode, mode, sizeof(hdmi-
> > >previous_mode));
> > + dw_hdmi_setup(hdmi, mode);
>
> This hdmi->previous_mode also looks strange, it is current mode and
> moreover it is always available from crtc state, there is no point in
> copying it to private field.

Sorry I don't know about this. Maybe you should ask the original author
of dw-hdmi?

>
> Regards
> Andrzej
> >
> > mutex_unlock(&hdmi->mutex);
> > }
>
>

\
 
 \ /
  Last update: 2018-08-14 07:29    [W:0.063 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site