lkml.org 
[lkml]   [2018]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 021/104] ARM: dts: imx6sx: fix irq for pcie bridge
Date
4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oleksij Rempel <o.rempel@pengutronix.de>

commit 1bcfe0564044be578841744faea1c2f46adc8178 upstream.

Use the correct IRQ line for the MSI controller in the PCIe host
controller. Apparently a different IRQ line is used compared to other
i.MX6 variants. Without this change MSI IRQs aren't properly propagated
to the upstream interrupt controller.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Fixes: b1d17f68e5c5 ("ARM: dts: imx: add initial imx6sx device tree source")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
arch/arm/boot/dts/imx6sx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -1305,7 +1305,7 @@
0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
<&clks IMX6SX_CLK_PCIE_AXI>,
<&clks IMX6SX_CLK_LVDS1_OUT>,

\
 
 \ /
  Last update: 2018-08-14 19:34    [W:0.307 / U:0.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site