lkml.org 
[lkml]   [2018]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/14] cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
Date
The kryo cpufreq driver reads the nvmem cell and uses that data to
populate the opps. There are other qcom cpufreq socs like krait which
does similar thing. Except for the interpretation of the read data,
rest of the driver is same for both the cases. So pull the common things
out for reuse.

Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
.../{kryo-cpufreq.txt => qcom-nvmem-cpufreq.txt} | 6 +-
drivers/cpufreq/Kconfig.arm | 4 +-
drivers/cpufreq/Makefile | 2 +-
.../{qcom-cpufreq-kryo.c => qcom-cpufreq-nvmem.c} | 124 ++++++++++++---------
4 files changed, 80 insertions(+), 56 deletions(-)
rename Documentation/devicetree/bindings/opp/{kryo-cpufreq.txt => qcom-nvmem-cpufreq.txt} (99%)
rename drivers/cpufreq/{qcom-cpufreq-kryo.c => qcom-cpufreq-nvmem.c} (65%)

diff --git a/Documentation/devicetree/bindings/opp/kryo-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
similarity index 99%
rename from Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
rename to Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
index c2127b9..6dcdfcd 100644
--- a/Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
+++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
@@ -19,7 +19,7 @@ In 'cpus' nodes:

In 'operating-points-v2' table:
- compatible: Should be
- - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
+ - 'operating-points-v2-qcom-cpu' for apq8096 and msm8996.
- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
efuse registers that has information about the
speedbin that is used to select the right frequency/voltage
@@ -127,7 +127,7 @@ Example 1:
};

cluster0_opp: opp_table0 {
- compatible = "operating-points-v2-kryo-cpu";
+ compatible = "operating-points-v2-qcom-cpu";
nvmem-cells = <&speedbin_efuse>;
opp-shared;

@@ -338,7 +338,7 @@ Example 1:
};

cluster1_opp: opp_table1 {
- compatible = "operating-points-v2-kryo-cpu";
+ compatible = "operating-points-v2-qcom-cpu";
nvmem-cells = <&speedbin_efuse>;
opp-shared;

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 52f5f1a..13fbd97 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -124,8 +124,8 @@ config ARM_OMAP2PLUS_CPUFREQ
depends on ARCH_OMAP2PLUS
default ARCH_OMAP2PLUS

-config ARM_QCOM_CPUFREQ_KRYO
- tristate "Qualcomm Kryo based CPUFreq"
+config ARM_QCOM_CPUFREQ_NVMEM
+ tristate "Qualcomm nvmem based CPUFreq"
depends on ARM64
depends on QCOM_QFPROM
depends on QCOM_SMEM
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index fb4a2ec..5544441 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -65,7 +65,7 @@ obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
-obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO) += qcom-cpufreq-kryo.o
+obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o
obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o
obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
diff --git a/drivers/cpufreq/qcom-cpufreq-kryo.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
similarity index 65%
rename from drivers/cpufreq/qcom-cpufreq-kryo.c
rename to drivers/cpufreq/qcom-cpufreq-nvmem.c
index efc9a7a..0ad8e5b 100644
--- a/drivers/cpufreq/qcom-cpufreq-kryo.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -9,7 +9,7 @@
* based on the silicon variant in use. Qualcomm Process Voltage Scaling Tables
* defines the voltage and frequency value based on the msm-id in SMEM
* and speedbin blown in the efuse combination.
- * The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC
+ * The qcom-cpufreq driver reads the msm-id and efuse value from the SoC
* to provide the OPP framework with required information.
* This is used to determine the voltage and frequency value for each OPP of
* operating-points-v2 table when it is parsed by the OPP framework.
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/slab.h>
@@ -42,9 +43,9 @@ enum _msm8996_version {
NUM_OF_MSM8996_VERSIONS,
};

-struct platform_device *cpufreq_dt_pdev, *kryo_cpufreq_pdev;
+static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;

-static enum _msm8996_version __init qcom_cpufreq_kryo_get_msm_id(void)
+static enum _msm8996_version __init qcom_cpufreq_get_msm_id(void)
{
size_t len;
u32 *msm_id;
@@ -73,34 +74,70 @@ static enum _msm8996_version __init qcom_cpufreq_kryo_get_msm_id(void)
return version;
}

-static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
+static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
+ struct nvmem_cell *speedbin_nvmem,
+ char **pvs_name,
+ u32 *versions)
{
- struct opp_table *opp_tables[NR_CPUS] = {0};
+ size_t len;
+ u8 *speedbin;
enum _msm8996_version msm8996_version;
+
+ msm8996_version = qcom_cpufreq_get_msm_id();
+ if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
+ dev_err(cpu_dev, "Not Snapdragon 820/821!");
+ return -ENODEV;
+ }
+
+ speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+ if (IS_ERR(speedbin))
+ return PTR_ERR(speedbin);
+
+ switch (msm8996_version) {
+ case MSM8996_V3:
+ *versions = 1 << (unsigned int)(*speedbin);
+ break;
+ case MSM8996_SG:
+ *versions = 1 << ((unsigned int)(*speedbin) + 4);
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ kfree(speedbin);
+ return 0;
+}
+
+static int qcom_cpufreq_probe(struct platform_device *pdev)
+{
+ struct opp_table *opp_tables[NR_CPUS] = { NULL };
+ int (*get_version)(struct device *cpu_dev,
+ struct nvmem_cell *speedbin_nvmem,
+ char **name, int *versions);
struct nvmem_cell *speedbin_nvmem;
struct device_node *np;
struct device *cpu_dev;
unsigned cpu;
- u8 *speedbin;
u32 versions;
- size_t len;
+ char *pvs_name = NULL;
+ const struct of_device_id *match;
int ret;

cpu_dev = get_cpu_device(0);
if (!cpu_dev)
return -ENODEV;

- msm8996_version = qcom_cpufreq_kryo_get_msm_id();
- if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
- dev_err(cpu_dev, "Not Snapdragon 820/821!");
+ match = pdev->dev.platform_data;
+ get_version = match->data;
+ if (!get_version)
return -ENODEV;
- }

np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
if (!np)
return -ENOENT;

- ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
+ ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu");
if (!ret) {
of_node_put(np);
return -ENOENT;
@@ -114,23 +151,10 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
return PTR_ERR(speedbin_nvmem);
}

- speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+ ret = get_version(cpu_dev, speedbin_nvmem, &pvs_name, &versions);
nvmem_cell_put(speedbin_nvmem);
- if (IS_ERR(speedbin))
- return PTR_ERR(speedbin);
-
- switch (msm8996_version) {
- case MSM8996_V3:
- versions = 1 << (unsigned int)(*speedbin);
- break;
- case MSM8996_SG:
- versions = 1 << ((unsigned int)(*speedbin) + 4);
- break;
- default:
- BUG();
- break;
- }
- kfree(speedbin);
+ if (ret)
+ return ret;

for_each_possible_cpu(cpu) {
cpu_dev = get_cpu_device(cpu);
@@ -166,24 +190,24 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
return ret;
}

-static int qcom_cpufreq_kryo_remove(struct platform_device *pdev)
+static int qcom_cpufreq_remove(struct platform_device *pdev)
{
platform_device_unregister(cpufreq_dt_pdev);
return 0;
}

-static struct platform_driver qcom_cpufreq_kryo_driver = {
- .probe = qcom_cpufreq_kryo_probe,
- .remove = qcom_cpufreq_kryo_remove,
+static struct platform_driver qcom_cpufreq_driver = {
+ .probe = qcom_cpufreq_probe,
+ .remove = qcom_cpufreq_remove,
.driver = {
- .name = "qcom-cpufreq-kryo",
+ .name = "qcom-cpufreq",
},
};

-static const struct of_device_id qcom_cpufreq_kryo_match_list[] __initconst = {
- { .compatible = "qcom,apq8096", },
- { .compatible = "qcom,msm8996", },
- {}
+static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
+ { .compatible = "qcom,apq8096", .data = qcom_cpufreq_kryo_name_version},
+ { .compatible = "qcom,msm8996", .data = qcom_cpufreq_kryo_name_version},
+ {},
};

/*
@@ -192,7 +216,7 @@ static int qcom_cpufreq_kryo_remove(struct platform_device *pdev)
* which may be defered as well. The init here is only registering
* the driver and the platform device.
*/
-static int __init qcom_cpufreq_kryo_init(void)
+static int __init qcom_cpufreq_init(void)
{
struct device_node *np = of_find_node_by_path("/");
const struct of_device_id *match;
@@ -201,32 +225,32 @@ static int __init qcom_cpufreq_kryo_init(void)
if (!np)
return -ENODEV;

- match = of_match_node(qcom_cpufreq_kryo_match_list, np);
+ match = of_match_node(qcom_cpufreq_match_list, np);
of_node_put(np);
if (!match)
return -ENODEV;

- ret = platform_driver_register(&qcom_cpufreq_kryo_driver);
+ ret = platform_driver_register(&qcom_cpufreq_driver);
if (unlikely(ret < 0))
return ret;

- kryo_cpufreq_pdev = platform_device_register_simple(
- "qcom-cpufreq-kryo", -1, NULL, 0);
- ret = PTR_ERR_OR_ZERO(kryo_cpufreq_pdev);
+ cpufreq_pdev = platform_device_register_data(NULL, "qcom-cpufreq",
+ -1, match, sizeof(*match));
+ ret = PTR_ERR_OR_ZERO(cpufreq_pdev);
if (0 == ret)
return 0;

- platform_driver_unregister(&qcom_cpufreq_kryo_driver);
+ platform_driver_unregister(&qcom_cpufreq_driver);
return ret;
}
-module_init(qcom_cpufreq_kryo_init);
+module_init(qcom_cpufreq_init);

-static void __init qcom_cpufreq_kryo_exit(void)
+static void __init qcom_cpufreq_exit(void)
{
- platform_device_unregister(kryo_cpufreq_pdev);
- platform_driver_unregister(&qcom_cpufreq_kryo_driver);
+ platform_device_unregister(cpufreq_pdev);
+ platform_driver_unregister(&qcom_cpufreq_driver);
}
-module_exit(qcom_cpufreq_kryo_exit);
+module_exit(qcom_cpufreq_exit);

-MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Kryo CPUfreq driver");
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. CPUfreq driver");
MODULE_LICENSE("GPL v2");
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2018-08-13 15:39    [W:0.072 / U:0.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site