lkml.org 
[lkml]   [2018]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] drm/bridge/synopsys: dw-hdmi: re-run dw_hdmi_setup when setting mode
From
Date
On 25.07.2018 05:56, Icenowy Zheng wrote:
> Currently dw_hdmi_setup is only run when the dw-hdmi bridge is enabled,
> with the mode set last time.
>
> When the bridge is enabled before any mode is set (this may happen when
> booting), the mode won't be set at all, some setup steps will be
> skipped or fail, and the HDMI output may not work.

I guess, it should not happen. Could you show the stack-trace.

>
> Re-run dw_hdmi_setup when setting mode, in order to prevent such
> situation.

mode_set is run with hardware disabled, thus usually it should not touch
hardware.


>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index 5971976284bf..e2f832182afe 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2007,6 +2007,7 @@ static void dw_hdmi_bridge_mode_set(struct drm_bridge *bridge,
>
> /* Store the display mode for plugin/DKMS poweron events */
> memcpy(&hdmi->previous_mode, mode, sizeof(hdmi->previous_mode));
> + dw_hdmi_setup(hdmi, mode);

This hdmi->previous_mode also looks strange, it is current mode and
moreover it is always available from crtc state, there is no point in
copying it to private field.

Regards
Andrzej
>
> mutex_unlock(&hdmi->mutex);
> }


\
 
 \ /
  Last update: 2018-08-13 13:49    [W:0.061 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site