lkml.org 
[lkml]   [2018]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] net/phy: Micrel KSZ8061 PHY link failure after cable connect
Date
-----Original Message-----
From: David Miller <davem@davemloft.net>
Sent: Montag, 30. Juli 2018 18:46
To: Onnasch, Alexander (EXT) <Alexander.Onnasch@landisgyr.com>
Cc: andrew@lunn.ch; f.fainelli@gmail.com; netdev@vger.kernel.org; linux-kernel@vger.kernel.org
Subject: Re: [PATCH] net/phy: Micrel KSZ8061 PHY link failure after cable connect

From: Alexander Onnasch <alexander.onnasch@landisgyr.com>
Date: Mon, 30 Jul 2018 16:01:27 +0200

> With Micrel KSZ8061 PHY, the link may occasionally not come up after
> Ethernet cable connect. The vendor's (Microchip, former Micrel) errata
> sheet 80000688A.pdf describes the problem and possible workarounds in
> detail, see below.
> The patch implements workaround 1, which permanently fixes the issue.
...
> Signed-off-by: Alexander Onnasch <alexander.onnasch@landisgyr.com>

This patch does not apply cleanly to any of my neworking trees.


Hello David

thanks a lot for reviewing ! How to proceed now ? If there is action required from my side please tell me.

best regards,
Alex


Alexander Onnasch | Landis+Gyr AG | Firmware Engineer
Phone: +41 41 935 6357 | Fax: +41 41 935 6211
Email: alexander.onnasch@landisgyr.com | Site: www.landisgyr.com | Address: Theilerstr. 1, CH-6301 Zug, Switzerland
manage energy better

\
 
 \ /
  Last update: 2018-08-13 12:42    [W:0.071 / U:4.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site