lkml.org 
[lkml]   [2018]   [Aug]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: aacraid: Regression in 4.14.56 with *genirq/affinity: assign vectors to all possible CPUs*
On Sat, Aug 11, 2018 at 10:14:18AM +0200, Paul Menzel wrote:
> Dear Greg,
>
>
> Am 10.08.2018 um 17:55 schrieb Greg Kroah-Hartman:
> > On Fri, Aug 10, 2018 at 04:11:23PM +0200, Paul Menzel wrote:
>
> > > On 08/10/18 15:36, Greg Kroah-Hartman wrote:
> > > > On Fri, Aug 10, 2018 at 03:21:52PM +0200, Paul Menzel wrote:
> > > > > Dear Greg,
> > > > >
> > > > >
> > > > > Commit ef86f3a7 (genirq/affinity: assign vectors to all possible CPUs) added
> > > > > for Linux 4.14.56 causes the aacraid module to not detect the attached devices
> > > > > anymore on a Dell PowerEdge R720 with two six core 24x E5-2630 @ 2.30GHz.
> > > > >
> > > > > ```
> > > > > $ dmesg | grep raid
> > > > > [ 0.269768] raid6: sse2x1 gen() 7179 MB/s
> > > > > [ 0.290069] raid6: sse2x1 xor() 5636 MB/s
> > > > > [ 0.311068] raid6: sse2x2 gen() 9160 MB/s
> > > > > [ 0.332076] raid6: sse2x2 xor() 6375 MB/s
> > > > > [ 0.353075] raid6: sse2x4 gen() 11164 MB/s
> > > > > [ 0.374064] raid6: sse2x4 xor() 7429 MB/s
> > > > > [ 0.379001] raid6: using algorithm sse2x4 gen() 11164 MB/s
> > > > > [ 0.386001] raid6: .... xor() 7429 MB/s, rmw enabled
> > > > > [ 0.391008] raid6: using ssse3x2 recovery algorithm
> > > > > [ 3.559682] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
> > > > > [ 3.570061] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
> > > > > [ 10.725767] Adaptec aacraid driver 1.2.1[50834]-custom
> > > > > [ 10.731724] aacraid 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
> > > > > [ 10.743295] aacraid: Comm Interface type3 enabled
> > > > > $ lspci -nn | grep Adaptec
> > > > > 04:00.0 Serial Attached SCSI controller [0107]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01)
> > > > > 42:00.0 Serial Attached SCSI controller [0107]: Adaptec Smart Storage PQI 12G SAS/PCIe 3 [9005:028f] (rev 01)
> > > > > ```
> > > > >
> > > > > But, it still works with a Dell PowerEdge R715 with two eight core AMD
> > > > > Opteron 6136, the card below.
> > > > >
> > > > > ```
> > > > > $ lspci -nn | grep Adaptec
> > > > > 22:00.0 Serial Attached SCSI controller [0107]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01)
> > > > > ```
> > > > >
> > > > > Reverting the commit fixes the issue.
> > > > >
> > > > > commit ef86f3a72adb8a7931f67335560740a7ad696d1d
> > > > > Author: Christoph Hellwig <hch@lst.de>
> > > > > Date: Fri Jan 12 10:53:05 2018 +0800
> > > > >
> > > > > genirq/affinity: assign vectors to all possible CPUs
> > > > > commit 84676c1f21e8ff54befe985f4f14dc1edc10046b upstream.
> > > > > Currently we assign managed interrupt vectors to all present CPUs. This
> > > > > works fine for systems were we only online/offline CPUs. But in case of
> > > > > systems that support physical CPU hotplug (or the virtualized version of
> > > > > it) this means the additional CPUs covered for in the ACPI tables or on
> > > > > the command line are not catered for. To fix this we'd either need to
> > > > > introduce new hotplug CPU states just for this case, or we can start
> > > > > assining vectors to possible but not present CPUs.
> > > > > Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
> > > > > Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
> > > > > Tested-by: Stefan Haberland <sth@linux.vnet.ibm.com>
> > > > > Fixes: 4b855ad37194 ("blk-mq: Create hctx for each present CPU")
> > > > > Cc: linux-kernel@vger.kernel.org
> > > > > Cc: Thomas Gleixner <tglx@linutronix.de>
> > > > > Signed-off-by: Christoph Hellwig <hch@lst.de>
> > > > > Signed-off-by: Jens Axboe <axboe@kernel.dk>
> > > > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > > >
> > > > > The problem doesn’t happen with Linux 4.17.11, so there are commits in
> > > > > Linux master fixing this. Unfortunately, my attempts to find out failed.
> > > > >
> > > > > I was able to cherry-pick the three commits below on top of 4.14.62,
> > > > > but the problem persists.
> > > > >
> > > > > 6aba81b5a2f5 genirq/affinity: Don't return with empty affinity masks on error
> > > > > 355d7ecdea35 scsi: hpsa: fix selection of reply queue
> > > > > e944e9615741 scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity
> > > > >
> > > > > Trying to cherry-pick the commits below, referencing the commit
> > > > > in question, gave conflicts.
> > > > >
> > > > > 1. adbe552349f2 scsi: megaraid_sas: fix selection of reply queue
> > > > > 2. d3056812e7df genirq/affinity: Spread irq vectors among present CPUs as far as possible
> > > > >
> > > > > To avoid further trial and error with the server with a slow firmware,
> > > > > do you know what commits should fix the issue?
> > > >
> > > > Look at the email on the stable mailing list:
> > > > Subject: Re: Fix for 84676c1f (b5b6e8c8) missing in 4.14.y
> > > > it should help you out here.
> > >
> > > Ah, I didn’t see that [1] yet. Also I can’t find the original message, and a
> > > way to reply to that thread. Therefore, here is my reply.
> > >
> > > > Can you try the patches listed there?
> > >
> > > I tried some of these already without success.
> > >
> > > b5b6e8c8d3b4 scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity
> > > 2f31115e940c scsi: core: introduce force_blk_mq
> > > adbe552349f2 scsi: megaraid_sas: fix selection of reply queue
> > >
> > > The commit above is already in v4.14.56.
> > >
> > > 8b834bff1b73 scsi: hpsa: fix selection of reply queue
> > >
> > > The problem persists.
> > >
> > > The problem also persists with the state below.
> > >
> > > 3528f73a4e5d scsi: core: introduce force_blk_mq
> > > 16dc4d8215f3 scsi: hpsa: fix selection of reply queue
> > > f0a7ab12232d scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity
> > > 6aba81b5a2f5 genirq/affinity: Don't return with empty affinity masks on error
> > > 1aa1166eface (tag: v4.14.62, stable/linux-4.14.y) Linux 4.14.62
> > >
> > > So, some more commits are necessary.
> >
> > Or I revert the original patch here, and the follow-on ones that were
> > added to "fix" this issue. I think that might be the better thing
> > overall here, right? Have you tried that?
>
> Yes, reverting the commit fixed the issue for us. If Christoph or Ming do
> not have another suggestion for a commit, that would be the way to go.

Christoph or Ming, any ideas here?

In looking at the aacraid code, I don't see anywhere that this is using
a specific cpu number for queues or anything, but I could be wrong.
Ideally this should also be failing in 4.17 or 4.18-rc right now as well
as I don't see anything that would have "fixed" this recently. Unless
I'm missing something here?

thanks,

greg k-h

\
 
 \ /
  Last update: 2018-08-11 15:51    [W:0.137 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site