Messages in this thread Patch in this message | | | From | Aapo Vienamo <> | Subject | [PATCH v2 32/40] arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V | Date | Fri, 10 Aug 2018 21:08:34 +0300 |
| |
Set regulator-min-microvolt property of ldo2 to 1.8 V in tegra210-p2180.dtsi. ldo2 is used by the sdmmc1 SDHCI controller and its voltage needs to be adjusted down to 1.8 V to support faster signaling modes. It appears that the comment about the SDHCI driver requesting invalid voltages no longer applies.
Signed-off-by: Aapo Vienamo <avienamo@nvidia.com> Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> --- arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index 212e663..8496101 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -178,16 +178,7 @@ vddio_sdmmc: ldo2 { regulator-name = "VDDIO_SDMMC"; - /* - * Technically this supply should have - * a supported range from 1.8 - 3.3 V. - * However, that would cause the SDHCI - * driver to request 2.7 V upon access - * and that in turn will cause traffic - * to be broken. Leave it at 3.3 V for - * now. - */ - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-boot-on; -- 2.7.4
| |