lkml.org 
[lkml]   [2018]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: aacraid: Regression in 4.14.56 with *genirq/affinity: assign vectors to all possible CPUs*
From
Date
Dear Greg,


On 08/10/18 15:36, Greg Kroah-Hartman wrote:
> On Fri, Aug 10, 2018 at 03:21:52PM +0200, Paul Menzel wrote:
>> Dear Greg,
>>
>>
>> Commit ef86f3a7 (genirq/affinity: assign vectors to all possible CPUs) added
>> for Linux 4.14.56 causes the aacraid module to not detect the attached devices
>> anymore on a Dell PowerEdge R720 with two six core 24x E5-2630 @ 2.30GHz.
>>
>> ```
>> $ dmesg | grep raid
>> [ 0.269768] raid6: sse2x1 gen() 7179 MB/s
>> [ 0.290069] raid6: sse2x1 xor() 5636 MB/s
>> [ 0.311068] raid6: sse2x2 gen() 9160 MB/s
>> [ 0.332076] raid6: sse2x2 xor() 6375 MB/s
>> [ 0.353075] raid6: sse2x4 gen() 11164 MB/s
>> [ 0.374064] raid6: sse2x4 xor() 7429 MB/s
>> [ 0.379001] raid6: using algorithm sse2x4 gen() 11164 MB/s
>> [ 0.386001] raid6: .... xor() 7429 MB/s, rmw enabled
>> [ 0.391008] raid6: using ssse3x2 recovery algorithm
>> [ 3.559682] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>> [ 3.570061] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
>> [ 10.725767] Adaptec aacraid driver 1.2.1[50834]-custom
>> [ 10.731724] aacraid 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
>> [ 10.743295] aacraid: Comm Interface type3 enabled
>> $ lspci -nn | grep Adaptec
>> 04:00.0 Serial Attached SCSI controller [0107]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01)
>> 42:00.0 Serial Attached SCSI controller [0107]: Adaptec Smart Storage PQI 12G SAS/PCIe 3 [9005:028f] (rev 01)
>> ```
>>
>> But, it still works with a Dell PowerEdge R715 with two eight core AMD
>> Opteron 6136, the card below.
>>
>> ```
>> $ lspci -nn | grep Adaptec
>> 22:00.0 Serial Attached SCSI controller [0107]: Adaptec Series 8 12G SAS/PCIe 3 [9005:028d] (rev 01)
>> ```
>>
>> Reverting the commit fixes the issue.
>>
>> commit ef86f3a72adb8a7931f67335560740a7ad696d1d
>> Author: Christoph Hellwig <hch@lst.de>
>> Date: Fri Jan 12 10:53:05 2018 +0800
>>
>> genirq/affinity: assign vectors to all possible CPUs
>>
>> commit 84676c1f21e8ff54befe985f4f14dc1edc10046b upstream.
>>
>> Currently we assign managed interrupt vectors to all present CPUs. This
>> works fine for systems were we only online/offline CPUs. But in case of
>> systems that support physical CPU hotplug (or the virtualized version of
>> it) this means the additional CPUs covered for in the ACPI tables or on
>> the command line are not catered for. To fix this we'd either need to
>> introduce new hotplug CPU states just for this case, or we can start
>> assining vectors to possible but not present CPUs.
>>
>> Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
>> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
>> Tested-by: Stefan Haberland <sth@linux.vnet.ibm.com>
>> Fixes: 4b855ad37194 ("blk-mq: Create hctx for each present CPU")
>> Cc: linux-kernel@vger.kernel.org
>> Cc: Thomas Gleixner <tglx@linutronix.de>
>> Signed-off-by: Christoph Hellwig <hch@lst.de>
>> Signed-off-by: Jens Axboe <axboe@kernel.dk>
>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>>
>> The problem doesn’t happen with Linux 4.17.11, so there are commits in
>> Linux master fixing this. Unfortunately, my attempts to find out failed.
>>
>> I was able to cherry-pick the three commits below on top of 4.14.62,
>> but the problem persists.
>>
>> 6aba81b5a2f5 genirq/affinity: Don't return with empty affinity masks on error
>> 355d7ecdea35 scsi: hpsa: fix selection of reply queue
>> e944e9615741 scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity
>>
>> Trying to cherry-pick the commits below, referencing the commit
>> in question, gave conflicts.
>>
>> 1. adbe552349f2 scsi: megaraid_sas: fix selection of reply queue
>> 2. d3056812e7df genirq/affinity: Spread irq vectors among present CPUs as far as possible
>>
>> To avoid further trial and error with the server with a slow firmware,
>> do you know what commits should fix the issue?
>
> Look at the email on the stable mailing list:
> Subject: Re: Fix for 84676c1f (b5b6e8c8) missing in 4.14.y
> it should help you out here.

Ah, I didn’t see that [1] yet. Also I can’t find the original message, and a
way to reply to that thread. Therefore, here is my reply.

> Can you try the patches listed there?

I tried some of these already without success.

b5b6e8c8d3b4 scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity
2f31115e940c scsi: core: introduce force_blk_mq
adbe552349f2 scsi: megaraid_sas: fix selection of reply queue

The commit above is already in v4.14.56.

8b834bff1b73 scsi: hpsa: fix selection of reply queue

The problem persists.

The problem also persists with the state below.

3528f73a4e5d scsi: core: introduce force_blk_mq
16dc4d8215f3 scsi: hpsa: fix selection of reply queue
f0a7ab12232d scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity
6aba81b5a2f5 genirq/affinity: Don't return with empty affinity masks on error
1aa1166eface (tag: v4.14.62, stable/linux-4.14.y) Linux 4.14.62

So, some more commits are necessary.


Kind regards,

Paul


[1]: https://www.spinics.net/lists/stable/msg251103.html

[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2018-08-10 16:12    [W:0.058 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site